Abstract:In this study, a constitutive model based on microscopic physical mechanism of silicone rubber foams was established. A theoretical statistical model of rubber elasticity considering the effect of dangling chains was modified to build this model. When a strain amplification factor (X) was introduced, the theoretical model could fit the tensile stress-strain data of mono- and bi-modal foam matrix well (Adj. R-Square = 0.9989, 0.9983). Parameters related to the polymer network, namely, average molecular weight (Mc) and volume fraction (ϕ) of chain segments between adjacent cross-linking points (network strands), were calculated by probabilistic method from the number-average molecular weight (Mn), vinyl content (wVi) of the primary polysiloxanes and percent conversion (q) of vinyl groups. The primary and infinite strain amplification factors (X0, X∞) and decay exponent (z), introduced by X and related to the nanoparticles, were obtained by fitting. Inspired by the fact that the actual strain of matrix was lower than that of the foams’, we introduced another item, strain hysteresis item (H, related with the foam porosity and cell structure), into the statistical model as well. With the same above values of Mc, ϕ, X0 and X∞, the model could also fit the compressive stress-strain data of mono- and bi-modal foams well (Adj. R-Square = 0.9948, 0.9985). Interestingly, the strain hysteresis items of the mono- and bi-modal foams almost completely coincided under all experimental strains, which may be attributed to the almost equal porosity and similar cell structure of the two foams. This constitutive model may connect the macroscopic stress-strain behaviour to the parameters of microscopic molecular structures, promisingly providing a basis for the performance improvement and optimization of silicone rubber foams.

Numerical study on the large deformation of silicone rubber foams based on random cell models

A Numerical Study on the Large Deformations of Polymer Foams with Spherical Pores

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Establishment of Constitutive Model of Silicone Rubber Foams Based on Statistical Theory of Rubber Elasticity

Elastic behavior of bimodal poly(dimethylsiloxane) networks

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Three-dimensional modeling of the mechanical property of linearly elastic open cell foams

Design of lightweight silicone rubber foam for outstanding deformation recoverability based on supercritical CO2 foaming technology

NUMERICAL ANALYSIS OF THE CREEP AND STRESS RELAXATION OF LOW DENSITY OPEN-CELL FOAMS

Crushing behavior and deformation mechanism of additively manufactured Voronoi-based random open-cell polymer foams

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Mechanical properties of microcellular and nanocellular silicone rubber foams obtained by supercritical carbon dioxide

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

Stress relaxation behavior of 3D printed silicone rubber foams with different topologies under uniaxial compressive load

Preparation and properties of silicone rubber materials with foam/solid alternating multilayered structures

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

The Variety of the Stress-strain Response of Silicone Foam after Aging

Characterizing and Modeling the Wide Strain Rate Range Behavior of Air-Filled Open-Cell Polymeric Foam

High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams

Utilizing ANN for Predicting the Cauchy Stress and Lateral Stretch of Random Elastomeric Foams under Uniaxial Loading

Modeling of Macro-Deformation Behavior of Thin-Walled Aluminum Foam by Gas Injection Method