Abstract:The properties of the Poisson’s ratio of microcellular foams with an internal pressure in the voids and low porosity are investigated. Of prime interest is the effect of the matrix creep on the deformation of the foam and how this effect influences the later deformation characteristics of the material in terms of a Poisson description. First, the definitions of Poisson’s ratio for the microcellular foams under uniaxial stress are reviewed. Second, the deformation of the microvoids under the influence of the internal pressure is analyzed by means of Eshelby’s equivalent inclusion method. Next, the formula of the macroscopic strain of the microcellular foams is derived by using Mori–Tanaka’s scheme, and based on this formula, the expression of the Poisson’s ratio of the material is obtained. Further, the calculation of the Poisson’s ratio of the material is then carried out. Numerical results show that the Poisson’s ratio of the microcellular foams is a time-dependent parameter. It is also discussed that because of the effect of the internal pressure in the voids, the global Poisson’s ratio may be negative. Under the action of remote compressive load, the Poisson’s ratio of the microcellular foams may be unbounded. Finally, the effects of the loading rate, the Poisson’s ratio and the relaxation time of the polymeric matrix material, the porosity, and the pressure in the microvoids on the Poisson’s ratio are discussed with the aid of numerical estimates. These analytical results indicate that the Poisson’s ratio under uniaxial tension is different from that under uniaxial compression.

NUMERICAL ANALYSIS OF THE CREEP AND STRESS RELAXATION OF LOW DENSITY OPEN-CELL FOAMS

Multiaxial creep of low density open-cell foams

Three-dimensional modeling of the mechanical property of linearly elastic open cell foams

Numerical Modeling of the Compression Process of Elastic Open-cell Foams

Quasi-Static and Dynamic Compressive Behaviors of Closed-Cell Stochastic Foams Based on Voronoi Model

NUMERICAL ANALYSIS OF THE FRACTURE TOUGHNESS OF LOW-DENSITY OPEN-CELL VORONOI FOAMS

FINITE ELEMENT ANALYSIS OF ELASTIC PROPERTIES OF OPEN-CELL AND CLOSED-CELL FOAM BASED ON THREE KIND OF CELL MODELS

Investigation on elastic properties of closed-cell Voronoi foam

Prediction of Creep Properties of Fiber-Reinforced Closed-Cell Metallic Foams

A numerical study of the elastic properties of low density open-cell foams with tetrakaidecahedral cells

Study of Cell Irregularity Effects on the Compression of Closed-Cell Foams

Influence of Cell Strut Shape on the Mechanical Properties of Voronoi Open-Cell Foams

Creep of Closed-Cell Aluminum Foams: Effects of Imperfections and Predictive Modeling

The Properties of the Poisson’s Ratio of Microcellular Foams with Low Porosity: Non-Stationary, Negative Value, and Singularity

A Numerical Study on the Large Deformations of Polymer Foams with Spherical Pores

An Analytical Stress-Strain Model for Open-Cell Metal Foam

On Crushing Response of the Three-Dimensional Closed-Cell Foam Based on Voronoi Model

Numerical Modeling of the Fracture Behavior of Open Cell Foams

A note on the modelling of foams using Voronoi technique

The strain-rate dependent constitutive relation and mechanical properties of open-cell foam plastics in tension

Experimental and Numerical Evaluation of Fatigue Behavior of Foam Core Sandwich Structure