Abstract:Multifunctional open-cell copper foams are widely used in different industrial sections and are featured by their topological microstructures, thus generating robust mechanicalproperties, sound absorption, andthermalconductivity. In this paper, making use of 3D imaging techniques based on micro-CT X-Ray tomography, in situ compression experiments are performed for exploring the deformation features and internal local failure behaviors of open-cell copper foams. During the in-situ compression process, geometrical topological features of deformed samples at different strain levels were reconstructed based on 3D X-ray computed tomography images, and four types of geometrical components were identified in the open-cell copper foam samples, namely strut, node, closed-cell and groove, respectively. Afterwards, several types of finite element models are constructed, finite element analysis is performed and compared with experiments for understanding the deformation process for porous copper samples. In order to improve the mesh quality of finite element models reconstructed from X-Ray tomography images, the mesh was generated through surface fitting technique. Then, the generated mesh was imported into finite element analysis software ABAQUS/Explicit for numerical simulation, simulation results suggest that large amounts of plastic strain localization and structure collapses are formed during the compression process, and such plastic strain localization features are closely related to the initial spatial orientation of struts.

Study on the Compression Properties and Deformation Failure Mechanism of Open‐Cell Copper Foam

Investigations of the failure behaviors of open-cell copper foam based on in-situ X-ray tomography compression experiments and image reconstructed finite element modeling

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

An Analytical Stress-Strain Model for Open-Cell Metal Foam

Experimental and Numerical Study on Strain Rate Effects of Close-Celled Aluminum Foams

Temperature Effects on the Compressive Behaviors of Closed-Cell Copper Foams Prepared by Powder Metallurgy

Coupling Effect Of Porosity And Cell Size On The Deformation Behavior Of Al Alloy Foam Under Quasi-Static Compression

Deformation mechanism of closed-cell aluminum foam under uniaxial compression

Effects of cell wall property on compressive performance of aluminum foams

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Microstructural Influence on Compressive Behavior and Strain Rate Sensitivity of Open-Cell Nickel Foam

Study on Cell Deformation of Low Porosity Aluminum Foams under Quasi‐Static Compression by X‐Ray Tomography

The Strain Rate and Density Dependence of the Mechanical Properties of Closed-Cell Aluminum Foam

Low Strain Rate Compressive Behavior of High Porosity Closed-Cell Aluminum Foams

Strain Rate Behavior of Closed-Cell Al-Si-Ti Foams: Experiment and Numerical Modeling

Deformation Characteristic of Metal Foam under Different Strain Rate and Temperature

Rate-Dependent Constitutive Model Coupled with Temperature Softening for Open-Cell Aluminum Foam

Effect of Cell Structure on the Uniaxial Compression Properties of Closed-Cell Foam Materials

Experimental investigation on the strain-rate effect and inertia effect of closed-cell aluminum foam subjected to dynamic loading

Strain rate effects on the compressive property and the energy-absorbing capacity of aluminum alloy foams

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders