Abstract:The accurate prediction of the elastic modulus of aluminum foam is important for the application in high-tech fields, e.g. in aerospace industry. However, the scaling law based on the Gibson-Ashby model did not achieve the precise prediction of elastic modulus, in absence of complex porous structural features. In this study, we extended the scaling law by introducing the topological and morphological parameters into the multivariate equation. The 3D numerical images of aluminum foam specimens were obtained by X-ray tomography method, and the nine structural parameters were calculated and analyzed. The results show that as the porosity increases from 77% to 91%, the highest frequency of sphericity and solid material thickness of the cellular structure remains practically constant, although the distribution of cell size becomes more dispersed. The edges connections and the Inter-Branches Angle (IBA) of aluminum foam remain unchanged for all the specimens. Seven structural parameters were introduced into the extended scaling law to predict the elastic modulus with a higher residual value R 2 of 0.932, in contrast to the R 2 of 0.702 for the conventional scaling law. Through a stepwise linear regression method, the extended scale method was simplified by removing redundant parameters, and still achieved the elastic modulus predictions with a residual value R 2 of 0.929. The remaining structural parameters in the extended scaling law, i.e. relative density, solid material thickness, and sphericity, were supposed to independently influence the elastic modulus, according to the covariance analysis. The three independent parameters offer the possibility to accurately predict and regulate the mechanical properties of aluminum foam.

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

A Numerical Study on the Large Deformations of Polymer Foams with Spherical Pores

Predicting the Elastic Properties of Closed-Cell Aluminum Foams: a Mesoscopic Geometric Modeling Approach

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Influence of Cell Wall Material and Cell Numbers on Mechanical Properties of Closed-Cell Aluminum Foams

Three-dimensional modeling of the mechanical property of linearly elastic open cell foams

Quantitative relationships between cellular structure parameters and the elastic modulus of aluminum foam

Mechanical Properties and Constitutive Model Applied to the High-Speed Impact of Aluminum Foam That Considers Its Meso-Structural Parameters.

Modeling of Macro-Deformation Behavior of Thin-Walled Aluminum Foam by Gas Injection Method

Micro-CT in the mechanical properties and energy absorption of closed-cell aluminium foam

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Dynamic and Static Compression Tests and FEA Analyses of Aluminum Foam Specimen with Variable Density in the Loading Direction

Dynamic mechanical properties of closed-cell aluminum foams with uniform and graded densities

High temperature and mesostructure effect on aluminum foam compression responses

Effects of cell wall property on compressive performance of aluminum foams

Creep of Closed-Cell Aluminum Foams: Effects of Imperfections and Predictive Modeling

High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams

Numerical investigation of influences of porous density and strain-rate effect on dynamical responses of aluminum foam

A numerical study of the elastic properties of low density open-cell foams with tetrakaidecahedral cells

The mechanical behavior of epoxy resin foams and the numerical simulation based on phenomenological strain rate‐dependent constitutive model and cellular structure

Experimental and Micromechanical Study of Size Effects in the Constrained Deformation of Metallic Foams