Abstract:Epoxy/Al as a functional structural energetic composite material that can be used as an adhesive, energetic fragments and warhead shells due to its high energy density, low density, and high strength. It can release a large amount of chemical energy (about 21.36 kJ/g) through chemical reactions when subjected to high-speed impact and thermal stimulation. Whether used as a matrix or auxiliary component, it has enormous development potential. Therefore, it is particularly important to study the mechanical properties of Epoxy/Al energetic composite materials under different temperature environments and strain rates of loading. This article describes the preparation of Epoxy/Al specimens with a mass percentage of 70%–30% using vacuum curing after 24 h under 0.8 Bar and 50 °C. The mechanical properties of Epoxy/Al specimens under different loading conditions were characterized using a high and low temperature universal testing machine and a separate Hopkinson experimental system. The modulus prediction method of binary composite materials was improved by combining SEM (scanning electron microscopy) and microstructure, and an adaptive constitutive model was developed combined with the K Srinivas model and neural network model based on the Sherwood Frost empirical constitutive relationship. The results show that Epoxy/Al energetic composite material has a significant temperature effect. When the temperature exceeds 100 °C, Epoxy/Al energetic composite material will be a significant physical and chemical property transition (the specimen exhibits viscous fluid characteristics and gradually begins to slowly decompose). As the temperature decreases, the specimen gradually exhibits a certain degree of brittleness and strength is improved. Due to the deformation, displacement, and interfacial debonding of internal particles during the loading process, Epoxy/Al materials exhibit excellent impact energy absorption effects, with energy absorption reaching 15.30 MJ/m 3 at room temperature, and unit mass cost much lower than popular CFRP (carbon fiber-reinforced polymer) materials (CFRP energy absorption cost is 0.268 J/g/£, while Epoxy/Al materials do not exceed 0.013 J/g/£). During the dynamic loading process, Epoxy/Al energetic composite materials exhibit a phenomenon of structural reconstruction and enhancement throughout the entire loading process. The maximum strength at room temperature can reach 240.70 MPa, which is superior to all existing energetic materials of the same type. By introducing interface effects and quantifying them in the Halpin Tsai model, the existing prediction method for the Young's modulus of binary particle added composite materials has been effectively improved, reducing the prediction error of the Young's modulus of Epoxy/Al energetic composite materials from 14.2% to 2.4%. The numerical simulation results indicate that the newly developed constitutive model has high accuracy and can better reflect the mechanical properties of Epoxy/Al materials. The development method of this constitutive model has a positive contribution to the development of composite materials.

The mechanical behavior of epoxy resin foams and the numerical simulation based on phenomenological strain rate‐dependent constitutive model and cellular structure

High-Strength and Shape-Memory Epoxy Cellular Material with Wood-Like Architecture

Mechanical Performance of Polystyrene Foam (EPS): Experimental and Numerical Analysis

Molecular Dynamics Simulations of Mechanical Properties of Epoxy-Amine: Cross-linker Type and Degree of Conversion Effects

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Development of dynamic constitutive model of epoxy resin considering temperature and strain rate effects using experimental methods

Failure Analysis of Syntactic Foams: A Computational Model with Cohesive Law and XFEM

Characterization of Potting Epoxy Resins Performance Parameters Based on a Viscoelastic Constitutive Model

Mechanical behavior and optimization of constitutive prediction model for Epoxy/Al energetic composite materials considering temperature and strain rate effects

Computational modeling and simulation of temperature field evolution during the chemical foaming of epoxy foams

Testing and Representation of Strain Rate Sensitive Mechanical Properties of Epoxy Resin

Development of a hygrothermal constitutive model for epoxy resin considering the glass transition temperature and its applications

Thermal Conductivities and Mechanical Properties of Epoxy Resin as a Function of the Degree of Cross-linking

Three-dimensional modeling of the mechanical property of linearly elastic open cell foams

A Numerical Study on the Large Deformations of Polymer Foams with Spherical Pores

Uniaxial Compression Mechanical Properties of Foam Nickel/Iron-Epoxy Interpenetrating Phase Composites

Study on mechanical and thermal properties of a modified epoxy resin

Mechanical Properties and Constitutive Model Applied to the High-Speed Impact of Aluminum Foam That Considers Its Meso-Structural Parameters.

All-polymer syntactic foams: Linking large strain cyclic experiments to Quasilinear Viscoelastic modelling for materials characterisation

Compression Mechanics for Carbon-Fiberreinforced Epoxy Resin Composites Under Inplane and Out-Of-Plane Quasi-Static and Dynamic Loadings

Study on Quasi-Static Compressive Properties of Aluminum Foam-Epoxy Resin Composite Structures