Abstract:In this research, a new computational method was proposed for describing the mechanical behavior of super-elastic-plastic foams under inhomogeneous compressive impacts. The method regarded the foam material as composed of two typical mechanical properties superimposed multiple times: one was the hyper-elastic layer, and the other was the elastoplastic layer. The hyper-elastic layer and the elastoplastic layer were interwoven and overlapped, divided into double-layer, four-layer, and six-layer configurations to characterize the foam material. After the equivalent layering of the foam, by comparing the results of the four-layer and six-layer divisions, it was found that when the layering reached four layers, the foam performance curve had already converged. The study utilized the HYPERFOAM model and Mullins effect in the ABAQUS software to establish the constitutive relationship of the hyper-elastic layer. It adopted the Crushable foam model to develop the constitutive relationship of the elastoplastic layer. Under uniaxial compression conditions, quasi-static and intermediate strain rate compression tests were performed on polyethylene (PE) foam materials with three different densities. Based on the experimental results, the parameter values of the hyper-elastic-plastic foam model in the ABAQUS code were determined. By comparing the computational results and the experimental results, the established finite element (FE) model was validated using the mechanical behavior of indentation and compression tests. The results showed that this method could effectively describe the complex mechanical behavior and residual deformation of hyper-elastic-plastic foam packaging materials under non-uniform compression, and the experimental and simulation results agreed well, proving the reliability of this method.

High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams

Static and Dynamic Behavior of PU Foams with Multilayer Coatings

Stiffness, Energy Dissipation, and Hyperelasticity in Hierarchical Multilayer Composite Nanocoated Open‐Cell Polyurethane Foams

A sophisticated periodic micro-model for closed-cell foam based on centroidal constraint and capacity constraint

Mechanical Performance of Polystyrene Foam (EPS): Experimental and Numerical Analysis

Topological Characteristics and Mechanical Properties of Uniaxially Thermoformed Auxetic Foam

Characterization of rigid open-cell foams using direct ultrasonic simulation

Three-dimensional modeling of the mechanical property of linearly elastic open cell foams

A New Method for the Dynamics Analysis of Super-Elastic-Plastic Foams under Inhomogeneous Loading and Unloading Conditions

A new modelling method for open cell foam structure based on centroidal and capacity constraint power diagram

Shear thickening inside elastic open-cell foams under dynamic compression

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Characterizing and Modeling the Wide Strain Rate Range Behavior of Air-Filled Open-Cell Polymeric Foam

The micro response mechanisms of foamed polymer rehabilitation material under compression: From a closed cell view

Experimental approach for characterizing the nonlinear, time and temperature‐dependent constitutive response of open‐cell polyurethane foams

Crushing of a closed-cell polymeric foam under triaxial loading

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Preparation, Characterization, and Mechanical Properties of Microcellular Poly(Aryl Ether Ketone) Foams

Experimental Study of the Dynamic and Static Compression Mechanical Properties of Closed-Cell PVC Foams

Dynamic and Static Compression Tests and FEA Analyses of Aluminum Foam Specimen with Variable Density in the Loading Direction

Assessment of Multiaxial Mechanical Response of Rigid Polyurethane Foams