Shear thickening inside elastic open-cell foams under dynamic compression

Samantha M. Livermore,Alice Pelosse,Michael van der Naald,Hojin Kim,Séverine Atis,Heinrich M. Jaeger

2024-10-04

Abstract:We measure the response of open-cell polyurethane foams filled with a dense suspension of fumed silica particles in polyethylene glycol at compression speeds spanning several orders of magnitude. The gradual compressive stress increase of the composite material indicates the existence of shear rate gradients in the interstitial suspension caused by wide distributions in pore sizes in the disordered foam network. The energy dissipated during compression scales with an effective internal shear rate, allowing for the collapse of three data sets for different pore-size foams. When scaled by this effective shear rate, the most pronounced energy increase coincides with the effective shear rate corresponding to the onset of shear thickening in our bulk suspension. Optical measurements of the radial deformation of the foam network and of the suspension flow under compression provide additional insight into the interaction between shear thickening fluid and foam. This optical data, combined with a simple model of a spring submerged in viscous flow, illustrates the dynamic interaction of viscous drag with foam elasticity as a function of compression rate, and identifies the foam pore size distribution as a critically important model parameter. Taken together, the stress measurements, dissipated energy, and relative motion of the fluid and the foam can be rationalized by knowing the pore size distribution and the average pore size of the foam.

Soft Condensed Matter

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the shear - thickening behavior of open - pore polyurethane foam (PU foam) filled with a high - concentration silica particle suspension (STF) under dynamic compression conditions and its relationship with the foam structure. Specifically, the researchers are concerned with:

1. **Performance of the shear - thickening phenomenon in the composite material**: When STF is filled into PU foam, this composite material exhibits a significantly enhanced stress response when subjected to dynamic compression, while the individual STF or dry foam does not show a similar enhancement effect. The researchers hope to understand the specific mechanism of this enhancement effect.

2. **Influence of the effective shear rate**: By introducing an effective shear rate \(\dot{\gamma}_{\text{eff}}\), the researchers attempt to explain why foams with different pore sizes exhibit different energy dissipation characteristics during the compression process. The effective shear rate is defined as:
\[
\dot{\gamma}_{\text{eff}}=\frac{v_c}{d_{\text{foam}}}
\]
where \(v_c\) is the compression speed and \(d_{\text{foam}}\) is the length scale characterizing the internal geometric features of the foam. The researchers found that when \(\dot{\gamma}_{\text{eff}}\) reaches the critical shear rate \(\dot{\gamma}_{\text{DST}}\) at which STF undergoes shear - thickening, the compressive performance of the composite material is significantly enhanced.

3. **Influence of the foam structure on shear - thickening**: Through experiments and optical measurements, the researchers explored the interaction between the deformation of the foam network and the flow of the suspension. They found that the pore size distribution of the foam has an important influence on the shear - thickening behavior. In particular, the energy dissipation curves of foams with different pore sizes during the compression process can be normalized by \(\dot{\gamma}_{\text{eff}}\), thereby revealing the decisive role of the foam pore size distribution in the shear - thickening behavior.

4. **Modeling of the dynamic interaction**: In order to gain a deeper understanding of the dynamic interaction between STF and the foam, the researchers established a simple model that describes the radial expansion of an elastic foam in a viscous fluid. This model takes into account the balance between viscous resistance and foam elasticity, as well as the influence of the compression rate on these factors.

Through these studies, the paper aims to reveal the mechanical behavior of STF - foam composites under dynamic compression conditions and provide a theoretical basis for designing composite materials with specific properties.