Abstract:Polyurethane foam (PUF) is one of the most well-known cellular materials and is widely employed in various industrial and biomedical fields thanks to its many advantages. These include mechanical and material characteristics such as low density and thermal conductivity, and high specific elastic modulus and strength. Despite of these advantages, the PUF has extremely complex material nonlinearity, with changes in density and strain rate, which is a major obstacle to material design and the application of PUF-based structures. PUF has elasto-viscoplastic behavior including three stages of material features, linear elasticity, softening/plateau with stress drop and densification. These phenomena depend strongly on strain rate and density. Therefore, in this study, a phenomenological constitutive model, namely, an elasto-viscoplastic model, was proposed to describe the density- and strain rate-dependent material nonlinear behavior of PUF. The yield surface-independent plastic multiplier, and the hardening- and softening-associated internal state variables proposed by Frank and Brockman, and Zairi et al. were adopted in the constitutive model, respectively. The proposed constitutive model was discretized using the implicit time integration algorithm and was implemented into a user-defined subroutine of the commercial finite element analysis program, ABAQUS. At the same time, a deterministic identification method for material parameters of the constitutive model was introduced to predict the precise material response of PUF under arbitrary densities and strain rates. To do this, the three-dimensional constitutive model was contracted to a one-dimensional equation, and the explicit equation for each material parameter was derived. Then, the strain hardening- and softeningdependent material parameters were calculated using experimental results, such as the work hardening ratestress curve and the yield stress-strain rate curve. After analyzing the obtained material parameters, it was found that the material parameters were strongly dependent on the density and the strain rate. Consequently, the macroscopic material response of PUF, such as a uniaxial compressive stress-strain curve, can be predicted based on the proposed method in this study.

Assessment of frequency and amplitude dependence on the cyclic degradation of polyurethane foams

Static and Dynamic Behavior of PU Foams with Multilayer Coatings

Stiffness, Energy Dissipation, and Hyperelasticity in Hierarchical Multilayer Composite Nanocoated Open‐Cell Polyurethane Foams

Impact Properties of Uniaxially Thermoformed Auxetic Foams

Preload Influence on the Dynamic Properties of a Polyurethane Elastomeric Foam

Experimental approach for characterizing the nonlinear, time and temperature‐dependent constitutive response of open‐cell polyurethane foams

Assessment of Multiaxial Mechanical Response of Rigid Polyurethane Foams

Compression properties of polymeric syntactic foam composites under cyclic loading

Characterizing and Modeling the Wide Strain Rate Range Behavior of Air-Filled Open-Cell Polymeric Foam

Experimental method for creep characterization of polymeric foam materials in media immersion

Shear thickening inside elastic open-cell foams under dynamic compression

All-polymer syntactic foams: Linking large strain cyclic experiments to Quasilinear Viscoelastic modelling for materials characterisation

Investigation On Compression Mechanical Properties Of Rigid Polyurethane Foam Treated Under Random Vibration Condition: An Experimental And Numerical Simulation Study

The influence of viscosity buildup on the foaming dynamics of rigid polyurethane foams

Study of Failure Behaviors of Rigid Polyurethane Foam Treated under Thermal and Vibration Conditions by Experiment and Numerical Simulation

Effect of Part Size, Displacement Rate, and Aging on Compressive Properties of Elastomeric Parts of Different Unit Cell Topologies Formed by Vat Photopolymerization Additive Manufacturing

High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams

Influence of Strain Rate and Temperature on Compressive Properties and Energy Absorption Efficiency of Expanded Polystyrene and Flexible Polyurethane Foam

Investigation on the failure behavior and compressive performance of rigid polyurethane foam treated under aerobic/anaerobic high temperature random vibration

Investigation of Density- and Strain Rate-dependent Strain Hardening-softening-coupled material Behavior of Polyurethane Foams using Elasto-viscoplastic Constitutive Model

Evaluating the Impact of Sample Irregularities on the Dynamic Stiffness of Polyurethane: Insights from Experimental and FEM Analysis