Abstract:(a) Processes for the preparation of spring‐like air layer structured polyurethane foams;(b) Compressive stress of RPU with strain of 40 % and 75 %;(c) Contact force‐time curve of impacting composite materials;(d) Compressive stress‐strain curve of polyurethane composite foam with double spring‐like air layer structure Due to its exceptional mechanical properties, polyurethane (PU) foam has found wide application in various fields. Microcellular foaming not only reduces weight but also enhances the cushioning properties of PU. However, current foaming methods have limitations in improving performance. Therefore, this study aimed to construct spring‐like sandwich‐structured flexible PU foam composites (SFFCs). These composites were prepared using a two‐step foaming method, utilizing a precise amount of polyol and isocyanate as raw materials, at room temperature (28–35°C). In the preparation process, warp‐knitted spacer fabrics (WKSFs) with spring‐like structures were encapsulated in the middle layer, while the top and bottom layers consisted of PUF (flexible PU foam with different ring radius differences) formed through the foaming process of polyol and isocyanate. The study focused on investigating the influence of the ring radius difference (r = 1, 1.5, 2) and the two‐layer layout (staggered, diagonal, overlapping) of the WKSFs on the compression and cushioning properties. The experimental results revealed a significant improvement in the mechanical properties of the PU with the incorporation of WKSFs. Particularly noteworthy was the excellent cushioning performance exhibited by the two‐layer WKSFs sample, RPUS‐1, in the dynamic impact test. RPUS‐1 absorbed 94.3% of the energy and reduced the impact value to 3921 N, which is 848 N (17.7%) lower than that of PU foam. Furthermore, even after 20 cycles of compression testing, the SFFCs retained excellent compressive properties, with the compressive stress only decreasing from 0.34 to 0.19 MPa. In conclusion, this study expands the application of PU in cushioning, demonstrating their potential in providing improved cushioning properties.

Design of lightweight silicone rubber foam for outstanding deformation recoverability based on supercritical CO2 foaming technology

Highly Sensitive Large Strain Cellulose/multiwalled Carbon Nanotubes (mwcnts)/thermoplastic Polyurethane (TPU) Nanocomposite Foams: from Design to Performance Evaluation

Microstructure and Properties of Microcellular Silicone Rubber Foams with Improved Surface Quality

Preparation and properties of silicone rubber materials with foam/solid alternating multilayered structures

Mechanical Properties of Silicone Rubber Enhanced Microcellular EPDM Foams Based on Supercritical CO2 Foaming Technology

Numerical study on the large deformation of silicone rubber foams based on random cell models

Mechanical properties of microcellular and nanocellular silicone rubber foams obtained by supercritical carbon dioxide

Mechanical Characteristics of Multi-Level 3D-Printed Silicone Foams

Key Factors for Regulation of Cell Morphology in Supercritical CO2 Direct Rapid Depressurization Foaming Silicone Rubber Process

Porous structures design in liquid silicone rubber foams through CO 2 controlled molecular crosslinking

Microcellular foams simultaneous reinforcing and toughening strategy of combining nano-fibrillation network and supercritical solid-state foaming

Elastomeric Foam Prepared by Supercritical Carbon Dioxide

3D printed multifunctional hierarchical structured cellular silicones with ultraelasticity, extreme load-bearing capacity, shape morphing and sensing properties

Preparation of Superelastic, Durable, and Lightweight Composite Foams Based on Multiple Cross-Linked Network Regulated Structures

A Green and Structure-Controlled Approach to the Generation of Silicone Rubber Foams by Means of Carbon Dioxide

Stress relaxation behavior of 3D printed silicone rubber foams with different topologies under uniaxial compressive load

3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam

Mechanically robust, superelastic and lightweight composite foam enabled by hydrogen bond cross-linking

Microcellular silicone rubber foams: The influence of reinforcing agent on cellular morphology and nucleation

Improved electromagnetic interference shielding performance of silicone rubber/CNTs composites by porous structure design via green supercritical CO 2 foaming

Two‐step foaming process for fabrication of flexible polyurethane foam composites with spring‐like air‐layer structure