Abstract:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Ahead of Print. Due to the high speed and high pressure operating conditions, wear between the finger seal and the rotor is inevitable, and this leads to an increase of leakage clearance and becomes an important factor affecting the seal life. The theory of anisotropic elasticity was employed to describe the mechanical characteristics of the seal material. An improved Archard wear model was proposed to calculate the nodal wear rate, and the local wear direction was also determined. The wear simulation model and procedure were established based on the Arbitrary Lagrangian Eulerian adaptive mesh strategy. The effects of material density, fabric orientation, pressure differential and rotor speed on the wear characteristics of finger seal and the change of leakage clearance caused by wear loss were studied. The results show that the wear first occurs at the heel area of the finger foot bottom and gradually extends to the toe area. C/C (carbon fibre reinforced carbon matrix) composite finger seal with higher material density has smaller leakage clearance and wear depth. With the increase of fabric orientation angle, the wear depth in the heel area of finger foot is smaller, and the circumferential wear area is narrower. The average wear depth of finger seal decreases with the orientation angle. When the orientation angle is 0, the seal leakage clearance is smaller. The increase of pressure differential not only aggravates the seal wear, but also expands the wear area, and also increases the average contact pressure and leakage clearance. Increasing the rotor speed make the wear depth of the heel area of finger foot gradually increase, but the wear area becomes narrower. The average contact pressure decreases and the average leakage clearance increases. This study provides a theoretical method and basis for the prediction and evaluation of the wear life and performance of C/C composite finger seal.

Gas Leakage Prediction of Contact Interface in Fabric Rubber Seal Based on a Rectangle Channel Model

Design and Characteristics of Fabric Rubber Sealing Based on Microchannel Model

Effect of Stress Relaxation on Sealing Performance of the Fabric Rubber Seal

A Measuring Method of Gas Leakage along the Contact Interface of the Stripped Rubber Seals

Prediction of the Contact Behavior of Stepseals: Experimental and Numerical Investigations

The Compression and Friction of Tubular Rubber Seal under the Curved Surface Loading

Study on Leakage Rate of Rubber Sealing Structures Based on Percolation Theory

Effect of Swelling Behavior of Rubber Rings on the Sealing Performance for 70MPA Hydrogen Pressure Reducing Valves

Application of Fractal Contact Model in Dynamic Performance Analysis of Gas Face Seals

Gas Leakage Evaluation of Metallic Sealing Surfaces with Annular Morphology

A Porous Media Leakage Model of Contact Mechanical Seals Considering Surface Wettability

A Percolation Method of Leakage Calculation and Prediction Within the Mechanical Seal Interface

A Leakage Model of Contact Mechanical Seals Based on the Fractal Theory of Porous Medium

An Approach to Calculate Leak Channels and Leak Rates Between Metallic Sealing Surfaces

Macroscopical contact pressure and microscopic leakage performance analysis of rubber seal considering thermal oxygen aging effect

A Non-Ideal Geometry Based Prediction Approach of Fitting Performance and Leakage Characteristic of Precision Couplings.

Tangential contact modeling to seal considering elastic-plastic for lubrication transition mechanism

Analysis of Static Sealing Rules of Foamed Silicone Rubber Based on a Porous Media Model

Wear modelling and sealing performance prediction of C/C composite finger seal

PEMFC sealing modeling relating to fractal characteristics of gasket-BPP interface based on micro-contact

Prediction of sealing interface leakage based on porous medium model considering effective porosity