Abstract:Abstract Periodic shutdowns, which decompress service pressure down to atmospheric pressure, are common in offshore flexible pipe systems. In high pressure and high temperature operations, the use of multi-layer barrier flexible pipes is also common. A multi-layer barrier usually combines inner sacrificial and pressure sheaths and, under certain circumstances, the annular gap between these sheaths is filled with fluid. When this fluid is trapped in this gap, which may occur due to a rapid decompression on shutdown operations or an accidental opening of an upstream valve, the flexible pipe system may fail. The trapped fluid tends to be released slower than the fluid that transiently flows under the bore thus generating a differential pressure, which is function of the rate of decompression, and may induce the collapse of the inner carcass. Therefore, the assessment of the magnitude of this differential pressure is crucial to prevent safe decompression rates. This article describes a numerical model, based on finite differences, to predict the differential pressure magnitude for risers in catenary configurations. The model is developed considering fundamental fluid dynamics principles, such as the conservation equations, for a one-dimensional geometry. The results are compared to previously published literature data for a given 4” flexible pipes under two different geometric configurations (horizontal and catenary). The results from the proposed model agreed quite well with those from a previous proposed approach for horizontal configurations, while the catenary configuration analyses evidenced the impact of the gravity parcel on the differential pressure between the pressure sheath and the bore of the pipe.

Experimental and numerical analysis of failure in flexible pipe by a mechanism of intentional damage

Viscoelastic and Damage Model of Polyethylene Pipe Material for Slow Crack Growth Analysis

Investigation On Creep-Rupture Failure Time Of Hdpe Pipe Under Hydrostatic Pressure

Experimental and Numerical Investigation on the Seismic Behavior of above Ground High Density Polyethylene Pipe in Nuclear Power Plant

Determining the influence of an artificial defect on the mechanical properties of a flexible pipeline material during a rupture test

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

On Collapse Failure Analysis Of Subsea Corroded Sandwich Pipelines Under External Pressure

Analysis of the Mechanical Behaviors of Fiber Reinforced Unbonded Flexible Pipe Under Combined Load

An analytical approach for assessing the collapse strength of an unbonded flexible pipe

Elastoplastic Pipe-Soil Interaction Analyses of Partially-Supported Jointed Water Mains

Tensile strength of the unbonded flexible pipes

On the Collapse Failure of Dented Pipes under Bending Moment and External Pressure

Torsional Response Analysis of Flexible Pipe Based on Theory and Finite Element Method

The performance and causes of failure of polyethylene pipes subjected to constant and fluctuating internal pressure loadings

Behavior of Flexible Pipe Subjected to Internal Pressure

Study On The Failure Mode Of Cracking Through The Fitting Of Electrofusion Joint

Failure pressure estimation for an aged and corroded oil and gas pipeline: A finite element study

Decompression Analysis of Multi-Layered Barrier Flexible Pipes Under Catenary Configuration

Flexible Pipes: Influence of the Pressure Armor in the Wet Collapse Resistance

Damage and blasting failure of marine riser with slips bite-mark