Abstract:This paper presents a novel digital silicon gyroscope interface circuit, designed by 0.35 mu m BCD process, and the chip area is 4.8 mm*5.0 mm. The traditional noise model of charge amplifier decomposes the noise into voltage noise and current noise. But the test results show that current noise accounts for a large proportion, which is not consistent with the theoretical model. Through the analysis of experimental data and the study of operational amplifier's working principle in charge amplifier, a new noise model is established, which makes the experimental data closer to the theoretical model. The design makes use of the bandpass characteristics of the bandpass sigma-delta modulator consistent with the sensitive structure of the silicon gyroscope, and optimizes the digital principle of the silicon gyroscope. The digital demodulation of bandpass sigma-delta modulator (BP SDM) can directly separate the in-phase component from the orthogonal component, which eliminates the tedious design of carrier signal digitization and multi-digital filtering, simplifies the frame structure of the whole digital silicon gyroscope system and reduces the design difficulty and physical cost. The ASIC of silicon gyroscope digital interface circuit is tested in combination with the sensitive structure. The noise density of 0.0014 degrees/s/Hz(1/2), zero stability of 1 degrees/h (1 sigma) and 0.2 degrees/h (Allen variation). The test of ASIC and the whole machine proves the correctness of the theoretical model, which reflects the correctness of the performance of the digital interface circuit of silicon gyroscope.

Design and Test of a Self-Oscillating Driving ASIC for a Low-Q Gyroscope Based on PI Controller

A Closed-Loop Self-Excited Drive Circuit for Quartz Gyroscope

Constant-frequency Oscillation Control for Vibratory Micro-Machined Gyroscopes

Research on a Silicon Gyroscope Interface Circuit Based on Closed-Loop Controlled Drive Loop

Designing of a Micromachined Gyroscope System with a Closed-Loop DC Biased Interface ASIC

An Interface ASIC for MEMS Vibratory Gyroscopes with Nonlinear Driving Control

Drive Mode Control for MEMS Gyroscopes with Electrostatically Tunable Structure

An Interface ASIC Design of MEMS Gyroscope with Analog Closed Loop Driving

Design and Test of MEMS Gyroscope Control System Based on LMSD

Analysis on Digital Automatic Gain Control of MEMS Gyro Driven-Loop Circuit

Design and test of the interface of the dual-chip integrated digital silicon gyroscope ASIC

Design of the Micromachined Gyroscope Interface ASIC

A Digital Interface ASIC for Triple-Axis MEMS Vibratory Gyroscopes

A Low-Noise Interface ASIC for MEMS Disk Resonator Gyroscope

Modeling and Simulation of Mixed-Signal Interface for Gyroscopes

ASIC design of micro-mechanical gyro interface of low temperature drift quartz with temperature compensation

Digital closed-loop driver design of micromechanical gyroscopes based on coordinated rotation digital computer algorithm

The Design of Automatic Gain Control in Self-Excitation Drive Circuit of Gyroscope

Design of Digital Demodulation Circuit for Closed Loop Control of Resonant MEMS Gyroscopes

A Low-Noise HV Interface Circuit for MEMS Vibratory Gyroscope

Research On Digital Silicon Gyroscope Interface Circuit Based On Bandpass Sigma-Delta Modulator