Abstract:This study utilized a conventional solid-state reaction method to prepare ZnO–Bi 2 O 3 –Sb 2 O 3 –Co 3 O 4 –Mn 3 O 4 –Nb 2 O 5 varistors sintered at low temperatures of 860 °C–880 °C. The effects of the different amounts of SiO 2 and SiO 2 -B 2 O 3 co-doping on the microstructure and varistor properties were investigated. The nonlinearity coefficient (α) increased from 51 for the sample without adding SiO 2 to 66 for the sample with 1.0wt% SiO 2 , and the breakdown voltage increased from 834 to 1260 V/mm. However, with excess SiO 2 addition, the α value gradually decreased from 66 for the sample with 1 wt% SiO 2 to 52 for the sample with 2.0 wt% SiO 2 , while the breakdown voltage continued to increase. Co-doping SiO 2 –B 2 O 3 improves liquid phase sintering due to the relatively low melting point of SiO 2 –B 2 O 3 –Bi 2 O 3 additives. The α value increased from 66 for the sample without adding B 2 O 3 to 83 for the sample with 2.0 wt% B 2 O 3 , while the breakdown voltage decreased from 1260 to 1120 V/mm. In comparison to higher temperature alternatives, the lower sintering temperatures (860 °C–880 °C) used in this study result in lower energy consumption during the manufacturing process. Because of their favorable cost-energy efficiency ratio, the SiO 2 –B 2 O 3 co-doped ZnO–Bi 2 O 3 varistors emerge as promising candidates for large-scale production.

Synthesis of Pr 6O 11 doped ZnO-based varistors by pyrogenic decomposition of nitrate

Optimization of Sintering Temperature and Doping Level of Cr2O3 in ZnO-Pr6O11-Based Varistor Ceramics

B 2O 3-doped ZnO-Pr 6O 11 based varistor ceramics

Effect of SnO2 Doping on Microstructural and Electrical Properties of ZnO–Pr6O11 Based Varistor Ceramics

Elaboration and electrical characterization of ZnO-based varistor ceramics in different sintering temperatures

Characterisation of Zno-Based Varistors Prepared from Nanometre Precursor Powders

B<sub>2</sub>O<sub>3</sub>-Doped ZnO-Pr<sub>6</sub>O<sub>11</sub> Based Varistor Ceramics

Microstructure and electrical properties of praseodymium oxide doped Bi2O3 based ZnO varistor films

Influence of Fe2O3 Doping on Microstructural and Electrical Properties of ZnO–Pr6O11 Based Varistor Ceramic Materials

Effect of B2O3 Doping on the Microstructure and Electrical Properties of ZnO-Based Varistors

Effects of SiO2 and B2O3 on electrical properties of low-temperature sintered ZnO–Bi2O3 varistors

Influence of ZnSb2O6 Doping on Phase, Electrical and Dielectric Properties of ZnO Varistors

Microstructure and Electrical Properties of ZnO-Pr6O11-Dy2O3-Based Varistor Ceramics Doped with La2O3

Properties of ZnO Varistors Prepared with Nano-Sized Powders

Admittance Spectroscopy of Y<sub>2</sub>O<sub>3</sub>-Doped ZnO Varistors Sintered at Different Temperature

INFLUENCE OF Fe_2O_3 DOPING ON THE ELECTRICAL PROPERTIES OF ZnO-Pr_6O_(11) BASED VARISTOR MATERIALS

Effect of Sc2O3 doping on microstructure and electrical properties of ZnO–Bi2O3-based varistors

An ultralow concentration of Cr2O3 dopants driven lower temperature sintering ZnO‐based varistor ceramics

Microstructure and Electrical Properties of Ga2o3 Doping on Zno Varistor Ceramics with Different Sintering Temperature

Influence of SnO2 on ZnO–Bi2O3–Co2O3 Based Varistor Ceramics