Abstract:In this paper, the effect of the raw particle size and the annealing process on the compositions, microstructure, mechanical, thermal, and electrical properties of ZnO varistors was investigated using X-ray diffraction, infrared, X-ray photoelectron spectroscopy, scanning electron microscopy, electric field–current density, capacitance–voltage, mechanical, and thermal expansion measurements. Furthermore, the ZnO grain growth mechanism during the annealing process was discussed in detail. Results show that when the raw particle size equaled 90 nm and sintering was performed at 1100 °C for 2 h, the obtained ZnO-based varistors possessed excellent mechanical, thermal, and electrical properties; the E1mA, α, JL, and K values were 1015.3 V mm–1, 37.98, 2.45 μA cm–2, and 1.37, respectively, due to the highest bulk density and the finest uniform particle size distribution. When annealing occurred at 300 °C for three times, values of σf, KIC, E1mA, α, JL, and K reached 175.35 MPa, 1.96 MPa m1/2, 1180.2 V mm–1, 43.58, 2.15 μA cm–2, and 1.2, indicating improvements of approximately 14.7%, 4%, 16.2%, 14.7%, − 12.2%, and 11.11% compared with those of the non-annealed ZnO-based varistors, respectively, being due to the improved uniformity of grain size distribution and the re-distribution of donor Al3+ and Y3+ in the ZnO crystal and grain boundary. The annealing process lead to the transformation of Sb3+ to Sb5+ in the ZnO crystal, which could generate two additional coordination sites. The newly generated sites could combine with O2- in other crystals to increase the grain growth, resulting in clear grain growth on the surface, improved grain size distribution, and regular grain shape in the interior of ZnO-based varistors.

Characterisation of Zno-Based Varistors Prepared from Nanometre Precursor Powders

Characterization of Zno Based Varistor Derived from Nano Zno Powders and Ultrafine Dopants

Synthesis of Novel Core-Shell Nanocomposites for Fabricating High Breakdown Voltage ZnO Varistors

Properties of ZnO Varistors Prepared with Nano-Sized Powders

Preparation of Composite Additives Powder by Coprecipitation Method and Investgation of ZnO Varistor Ceramics

Preparation of Zno-Glass Varistor from Tetrapod Zno Nanopowders

Preparation, Characterization and Dielectric Response of a High-Breakdown-field ZnO-based Varistor

Microstructural analysis of varistors prepared from nanosize ZnO

Zno Varistors Fabricated by the Liquid Phase Method and their Study

Coprecipitation Preparation and Voltage Sensitive Characteristics of Doped ZnO Varistor

Enhanced voltage gradient and energy absorption capability in ZnO varistor ceramics by using nano-sized ZnO powders

Improvement of energy-handling capability of the ZnO varistors prepared by fractional precipitation on the seed materials

Synthesis of Pr 6O 11 doped ZnO-based varistors by pyrogenic decomposition of nitrate

High Voltage Gradient ZnO-Based Varistors from ZnO Nano-powders for DC Current Switching Application

Comparative study of microstructure and electrical properties of varistors prepared from plasma vapor-phase reaction process and french process ZnO powders

Improving Age Stability and Energy Absorption Capabilities of Zno Varistors Ceramics

Effects of raw particle size and annealing on microstructure, electrical and mechanical behaviors of ZnO-based varistors

Fabrication of High Performance Multilayer Zno Varistors with Chemically Synthesized Doped Zinc Oxide Powder

The Effects of Precipitant on the Defect Structures and Properties of Zno Varistor Ceramics

Property of ZnO Varistors Prepared by Fractional Precipitation on Seed Materials

Synthesis of Pr<sub>6</sub>O<sub>11</sub> Doped ZnO-Based Varistors by Pyrogenic Decomposition of Nitrate