Abstract:In this paper, the effect of the raw particle size and the annealing process on the compositions, microstructure, mechanical, thermal, and electrical properties of ZnO varistors was investigated using X-ray diffraction, infrared, X-ray photoelectron spectroscopy, scanning electron microscopy, electric field–current density, capacitance–voltage, mechanical, and thermal expansion measurements. Furthermore, the ZnO grain growth mechanism during the annealing process was discussed in detail. Results show that when the raw particle size equaled 90 nm and sintering was performed at 1100 °C for 2 h, the obtained ZnO-based varistors possessed excellent mechanical, thermal, and electrical properties; the E1mA, α, JL, and K values were 1015.3 V mm–1, 37.98, 2.45 μA cm–2, and 1.37, respectively, due to the highest bulk density and the finest uniform particle size distribution. When annealing occurred at 300 °C for three times, values of σf, KIC, E1mA, α, JL, and K reached 175.35 MPa, 1.96 MPa m1/2, 1180.2 V mm–1, 43.58, 2.15 μA cm–2, and 1.2, indicating improvements of approximately 14.7%, 4%, 16.2%, 14.7%, − 12.2%, and 11.11% compared with those of the non-annealed ZnO-based varistors, respectively, being due to the improved uniformity of grain size distribution and the re-distribution of donor Al3+ and Y3+ in the ZnO crystal and grain boundary. The annealing process lead to the transformation of Sb3+ to Sb5+ in the ZnO crystal, which could generate two additional coordination sites. The newly generated sites could combine with O2- in other crystals to increase the grain growth, resulting in clear grain growth on the surface, improved grain size distribution, and regular grain shape in the interior of ZnO-based varistors.

Microstructural analysis of varistors prepared from nanosize ZnO

Characterisation of Zno-Based Varistors Prepared from Nanometre Precursor Powders

Comparative study of microstructure and electrical properties of varistors prepared from plasma vapor-phase reaction process and french process ZnO powders

High Voltage Gradient ZnO-Based Varistors from ZnO Nano-powders for DC Current Switching Application

Characterization of Zno Based Varistor Derived from Nano Zno Powders and Ultrafine Dopants

Effects of raw particle size and annealing on microstructure, electrical and mechanical behaviors of ZnO-based varistors

Preparation, Characterization and Dielectric Response of a High-Breakdown-field ZnO-based Varistor

Properties of ZnO Varistors Prepared with Nano-Sized Powders

Enhanced voltage gradient and energy absorption capability in ZnO varistor ceramics by using nano-sized ZnO powders

Microstructure and Electrical Properties of ZnO-based Varistors Prepared by High-Energy Ball Milling

Synthesis of Novel Core-Shell Nanocomposites for Fabricating High Breakdown Voltage ZnO Varistors

Microstructure and Electrical Properties of ZrO2-doped ZnO Varistor Ceramics

Reliability enhancement of zinc oxide varistors using sputtered silver electrodes.

Microstructure Design and Optimization of ZnO-Bi2O3-Sb2O3 Based Ceramic Varistors

Microstructure design and optimization of ZnO-Bi 2O 3-Sb 2O 3 based ceramic varistors

Elaboration and electrical characterization of ZnO-based varistor ceramics in different sintering temperatures

Fabrication of High Performance Multilayer Zno Varistors with Chemically Synthesized Doped Zinc Oxide Powder

Microstructure and electrical properties of Y2O3-doped ZnO-based varistor ceramics

Effect of B2O3 doping on the microstructure and electrical properties of ZnO-based varistors

Investigation of dielectric relaxation and degradation behavior of two-step sintered ZnO varistors

Electron paramagnetic resonance study of ZnO varistor material