Abstract:Surface electropulsing treatment has been demonstrated to significantly improve the surface strength of electron beam melted (EBM) Ti-6Al-4V alloy. However, further investigation is needed to understand the effect of this treatment on the surface texture of the alloy, as the texture of Ti alloy plays a crucial role in its corrosion performance. In this study, we explored the changes in texture induced by surface electropulsing in EBM Ti-6Al-4V alloy using electron backscattered diffraction (EBSD) and micro-region X-ray diffraction (Micro-XRD). The results revealed that surface electropulsing created a 〈0001〉 α′ //transverse direction (TD) texture on the alloy surface, and the intensity of this texture remained unaffected with varying electropulsing time (180–240 ms). Additionally, this treatment led to the formation of long curved martensite laths that could cross the small angle prior-β grain boundaries. The finite element method (FEM) was employed to aid in the analysis of the texture evolution mechanism. The results revealed that the most rapid cooling rate occurred perpendicular to the contact surface with the copper electrode, along the building direction (BD). When the (0001) plane aligned parallel to the direction of the fastest cooling rate, it promoted the growth of martensite, leading to an increased production of martensite with the (0001) plane parallel to the BD direction and generating the 〈0001〉 α′ //TD texture. Therefore, by controlling the position of the copper electrode during surface electropulsing treatment, it is possible to manipulate the orientation of the (0001) plane of most α′ laths. This suggests that surface electropulsing treatment holds potential for application in other Ti alloys to enhance strength and optimize texture for biomedical applications.

Electropulsing-induced G-texture Evolution in a Deformed Fe–3%Si Alloy Strip

Electropulsing Induced Texture Evolution in the Recrystallization of Fe-3 Pct Si Alloy Strip

Effect of Electropulsing on Recrystallization of Fe-3%Si Alloy Strip

Texture Evolution in Cold-Rolled AZ31 Magnesium Alloy During Electropulsing Treatment

Effect of Electropulsing on Recrystallization and Mechanical Properties of Silicon Steel Strips

Enhancement of Ductility in Mg-3Al-1Zn Alloy with Tilted Basal Texture by Electropulsing

Microstructure and texture evolution of cold-rolled Mg-3Al-1Zn alloy by electropulse treatment stimulating recrystallization

Characterization and Calculation of the Dynamic Recrystallization Texture in Fe-3.0 Wt.% Si Alloy

Texture Evolution during Recrystallization and Grain Growth in Non-Oriented Electrical Steel Produced by Compact Strip Production Process

Microstructure and texture evolution of the cold-rolled AZ91 magnesium alloy strip under electropulsing treatment

Microstructure and Texture Evolution of Magnesium Alloys During Electropulse Treatment

Texture Modification of Magnesium Alloys During Electropulse Treatment

Rapid Anisotropy Recovery in Deformed FCC Metals by High-Density Pulsed Electric Current Treatment

Effect of Electroplastic Treatment on Microstructure and Texture Changes of a Cold Rolling AZ31 Strip

Electropulse-induced texture elimination and texture formation in hot-rolled annealed 35CrMo steel

Dynamic Electropulsing Induced Evolution of Basal Texture and Its Effect on Properties of Magnesium Alloy Az61

Electropulsing-induced Phase Transformations and Their Effects on the Single Point Diamond Turning of a Tempered Alloy AZ91

Surface electropulsing-induced texture evolution in electron beam melted Ti-6Al-4V alloy for biomedical application

Influence of Electropulsing Treatment on the Recrystallization and Texture of Ni9W Alloy Strip

Microstructure and Microtexture Evolution of Dynamic Recrystallization of a Ni-based Superalloy under High-Throughput Gradient Thermal Compression

A comprehensive study on texture evolution and recrystallization mechanism of Fe-4.5 wt% Si with strong {114}