Abstract:Surface electropulsing treatment has been demonstrated to significantly improve the surface strength of electron beam melted (EBM) Ti-6Al-4V alloy. However, further investigation is needed to understand the effect of this treatment on the surface texture of the alloy, as the texture of Ti alloy plays a crucial role in its corrosion performance. In this study, we explored the changes in texture induced by surface electropulsing in EBM Ti-6Al-4V alloy using electron backscattered diffraction (EBSD) and micro-region X-ray diffraction (Micro-XRD). The results revealed that surface electropulsing created a 〈0001〉 α′ //transverse direction (TD) texture on the alloy surface, and the intensity of this texture remained unaffected with varying electropulsing time (180–240 ms). Additionally, this treatment led to the formation of long curved martensite laths that could cross the small angle prior-β grain boundaries. The finite element method (FEM) was employed to aid in the analysis of the texture evolution mechanism. The results revealed that the most rapid cooling rate occurred perpendicular to the contact surface with the copper electrode, along the building direction (BD). When the (0001) plane aligned parallel to the direction of the fastest cooling rate, it promoted the growth of martensite, leading to an increased production of martensite with the (0001) plane parallel to the BD direction and generating the 〈0001〉 α′ //TD texture. Therefore, by controlling the position of the copper electrode during surface electropulsing treatment, it is possible to manipulate the orientation of the (0001) plane of most α′ laths. This suggests that surface electropulsing treatment holds potential for application in other Ti alloys to enhance strength and optimize texture for biomedical applications.

Influence of Electropulsing Treatment on the Recrystallization and Texture of Ni9W Alloy Strip

The effects of electropulsing on the recrystallization behavior of rolled pure tungsten

Effect of Electropulsing Treatment on the Microstructure and Superelasticity of TiNi Alloy

Effect of Electropulsing on Recrystallization of Fe-3%Si Alloy Strip

Influence of Electropulsing Treatment on Microstructure and Mechanical Properties of Cold-Rolled Mg–9Al–1Zn Alloy Strip

Microstructure and texture evolution of the cold-rolled AZ91 magnesium alloy strip under electropulsing treatment

Mechanism of Electropulsing Induced Recrystallization in a Cold-Rolled Mg–9Al–1Zn Alloy

Difference in Recrystallization Between Electropulsing-Treated and Furnace-Treated NiTi Alloy

Electropulsing Induced Texture Evolution in the Recrystallization of Fe-3 Pct Si Alloy Strip

Fabrication of Textured Ni–9.3at.%W Substrate by Electropulsing Intermediate Annealing Method

Enhancement of Ductility, Weakening of Anisotropy Behavior and Local Recrystallization in Cold-Rolled Ti-6Al-4V Alloy Strips by High-Density Electropulsing Treatment

The Improved Superelasticity of NiTi Alloy Via Electropulsing Treatment for Minutes

Effect of Electroplastic Treatment on Microstructure and Texture Changes of a Cold Rolling AZ31 Strip

Effect of Electropulsing Treatment on Microstructure and Mechanical Properties of Intermetallic Al3ti Alloy

Retracted: Effects of High-Energy Electro-Pulsing Treatment on Microstructure, Mechanical Properties and Corrosion Behavior of Ti-6al-4v Alloy (retracted Article. See Vol.90, Pg.781, 2018)

Rapid Anisotropy Recovery in Deformed FCC Metals by High-Density Pulsed Electric Current Treatment

Electropulsing treatment-induced the enhanced recrystallization of deformed Al 0.1 CoCrFeNi high-entropy alloy at lower temperature

Effect of Recovering Damage and Improving Microstructure in the Titanium Alloy Strip under High-Energy Electropulses

Surface electropulsing-induced texture evolution in electron beam melted Ti-6Al-4V alloy for biomedical application

Microstructure and Texture Evolution of Magnesium Alloys During Electropulse Treatment

Microstructure and Mechanical Properties of Cold-Rolled Mg-6Al-1Zn Alloy Strip Treated by Electropulsing Treatment