Abstract:High-temperature compression tests, electron backscatter diffraction (EBSD) and transmission electron microscope (TEM) observations are performed to investigate the effect of energy dissipation changes on the dynamic recrystallization microstructure of NiTi alloy during hot deformation. The Strain-Compensated Arrhenius-Type (SCAT) model and hot processing map of NiTi alloy are developed to predict the optimal processing window. The energy analysis of the dynamic recrystallization process is realized by combining the change of power dissipation rate (η) and the evolution of dynamic recrystallization. The results show that the dynamic recrystallization fraction of the alloy increased with the increase of energy dissipation. Rheological instability is mainly observed in the low η region, and the lowest dynamic recrystallization fraction is 23.49%. However, the η values fluctuate abnormally in the medium η region and the high η region. At 1000 °C, 1 × 10 −2 s −1 , the highest dynamic recrystallization fraction is 38.59%. At 950 °C, 1 s −1 , the dynamic recrystallization fraction decreased to 28.87%. The analysis shows that the dynamic recrystallization fraction is 33.68% and the microstructure is uniform at 850 °C, 1 × 10 −2 s −1 , which is the optimal processing parameter. In addition, the critical strain kinetic model is developed, and the critical strain is 0.298 at 850 °C, 1 × 10 −2 s −1 . The microstructure evolution of dynamic recrystallization under different strains (0.3–0.9) shows that discontinuous dynamic recrystallization and continuous dynamic recrystallization participate in the softening of NiTi alloy with the increase of strain. Different η areas have different energy for microstructure evolution. In the low η area, the main softening mechanism is discontinuous dynamic recrystallization. With the increase of η, the energy for microstructure evolution increases, and continuous dynamic recrystallization occurs. In the high η area, the main softening mechanism is continuous dynamic recrystallization.

Difference in Recrystallization Between Electropulsing-Treated and Furnace-Treated NiTi Alloy

Effect of Electropulsing Treatment on the Microstructure and Superelasticity of TiNi Alloy

The Improved Superelasticity of NiTi Alloy Via Electropulsing Treatment for Minutes

Influence of Electropulsing Treatment on the Recrystallization and Texture of Ni9W Alloy Strip

Electropulsing treatment-induced the enhanced recrystallization of deformed Al 0.1 CoCrFeNi high-entropy alloy at lower temperature

Effect of Electropulsing on Recrystallization of Fe-3%Si Alloy Strip

A Comparative Study on the Static Recrystallization Behavior of Cold-Rolled Mg-3Al-1Zn Alloy Stimulated by Electropulse Treatment and Conventional Heat Treatment

Enhancement of Ductility, Weakening of Anisotropy Behavior and Local Recrystallization in Cold-Rolled Ti-6Al-4V Alloy Strips by High-Density Electropulsing Treatment

The Improved Plasticity of NiTi Alloy Via Electropulsing in Rolling

Mechanism of Electropulsing Induced Recrystallization in a Cold-Rolled Mg–9Al–1Zn Alloy

Equivalent Heat Treatments and Mechanical Properties in Cold-Rolled TiNiFe Shape-Memory Alloys

Influence of Electropulsing Treatment on Microstructure and Mechanical Properties of Cold-Rolled Mg–9Al–1Zn Alloy Strip

Effect of Electroplastic Rolling on Deformability and Oxidation of NiTiNb Shape Memory Alloy

Recrystallization behavior of a hot-rolled TiBw/TA15 composite under electropulsing heat treatment

RETRACTED: Effect of Electropulsing Treatment on Microstructure and Mechanical Properties of Cold-Rolled Pure Titanium Strips

Microstructure changes during non-conventional heat treatment of thin Ni–Ti wires by pulsed electric current studied by transmission electron microscopy

Research on energy dissipation and dynamic recrystallization microstructure evolution behavior of NiTi alloy during hot deformation

The effects of electropulsing on the recrystallization behavior of rolled pure tungsten

Effect of Recovering Damage and Improving Microstructure in the Titanium Alloy Strip under High-Energy Electropulses

Accelerated improvement in tensile superelasticity of electron beam directed energy deposition manufactured NiTi alloys by artificial thermal cycling combined with low temperature aging treatment

Effect of post-heat treatments on the microstructure, martensitic transformation and functional performance of EBF3-fabricated NiTi shape memory alloy