Abstract:In the present work, a single solution treatment as well as solution/aging treatments were employed to regulate the precipitation behavior, martensitic transformation, mechanical and functional properties of EBF3-fabricated NiTi shape memory alloys. Under the optimized post-process heat treatment conditions, i.e., solution treatment at 1000 oC for 10 h followed by subsequent aging treatment at 500 oC for 4 h, the previously existing elongated Ti4Ni2Ox oxides were partially dissolved and interrupted into granular form and relatively uniformly distributed in the NiTi matrix. Meanwhile, the preexisting nanoscale Ni4Ti3 precipitates gradually transformed from clustered or segregated granular to a lenticular shape with the increase of the aging time. The martensite transformation routes also underwent an accompanying alteration, which changed from a one-step (B2-A ↔ B19’-M) to two-step (B2-A → R → B19’-M) transformation. Moreover, Ni4Ti3 precipitated with a coherent relationship of {123} B2-A //{11–20} Ni4Ti3 which increase the material strength by hindering dislocation movement and improve plasticity by providing a transition domain for accommodating deformation at the interface. The superelastic stability and narrow response hysteresis promoted by the presence of the R-phase are affected by residual (100) compound twins martensite in the NiTi matrix and the permanent plastic deformation activated in (011) [001] slip system of the B2-A phase. This deteriorates the superelastic recovery ratio from 83.6 to 57.4%, as observed after 10 loading-unloading cycles. The post-heat treatment regime presented in the current investigation can be used to modulate the material precipitation, phase transformation, as well as the mechanical and functional properties of EBF3-fabricated NiTi alloys. These results allow to extrapolate the potential for carefully selected post-heat treatment scheduled for additively manufacturing NiTi shape memory alloys.

Microstructure changes during non-conventional heat treatment of thin Ni–Ti wires by pulsed electric current studied by transmission electron microscopy

Effect of Chemical Ordering Annealing on Martensitic Transformation and Superelasticity in Polycrystalline Ni–Mn–Ga Microwires

Microstructure of Surface and Subsurface Layers of a Ni-Ti Shape Memory Microwire.

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

Tensile Deformation of Superelastic NiTi Wires in Wide Temperature and Microstructure Ranges

Microstructural Modification and Mechanical Improvement of Ultrafine-Grained Ti Alloy Through Electron Wind Force: an Innovative Approach

TEM study of the Ni-Ti shape memory micro-wire

Accelerated improvement in tensile superelasticity of electron beam directed energy deposition manufactured NiTi alloys by artificial thermal cycling combined with low temperature aging treatment

Stress induced martensitic transformation in NiTi at elevated temperatures: martensite variant microstructures, recoverable strains and plastic strains

The Improved Superelasticity of NiTi Alloy Via Electropulsing Treatment for Minutes

Effect of Electropulsing Treatment on the Microstructure and Superelasticity of TiNi Alloy

Metallurgical Characterization of Controlled Memory Wire Nickel-Titanium Rotary Instruments

Martensitic transformation induced by cooling NiTi wire under various tensile stresses: Martensite variant microstructures, textures, recoverable strains and plastic strains

Effect of post-heat treatments on the microstructure, martensitic transformation and functional performance of EBF3-fabricated NiTi shape memory alloy

Microstructure and Mechanical Properties of NiTi Alloy Prepared by Double-Wire + Arc Additive Manufacturing Plus In Situ Heat Treatment

Effect of Annealing on the Microstructure, Phase Composition and Microhardness of the Ni–Ti Alloy Produced by Wire-Feed Electron-Beam Additive Manufacturing

Effect of heat treatment on microstructure and functional properties of additively manufactured NiTi shape memory alloys

In situ Transmission Electron Microscopy Investigation of Electroplasticity in Single Crystal Nickel

Microstructure, Phase Transformation Behavior and Tensile Superelasticity of NiTi Shape Memory Alloys Fabricated by the Wire-Based Vacuum Additive Manufacturing

The Microstructure and Linear Superelasticity of Cold-Drawn TiNi Alloy