Effect of post-heat treatments on the microstructure, martensitic transformation and functional performance of EBF3-fabricated NiTi shape memory alloy

Binqiang Li,Binbin Wang,Liang Wang,J.P. Oliveira,Ran Cui,Yanan Wang,Guoqiang Zhu,Jianxin Yu,Yanqing Su

DOI: https://doi.org/10.1016/j.msea.2023.144897

2023-04-26

Abstract:In the present work, a single solution treatment as well as solution/aging treatments were employed to regulate the precipitation behavior, martensitic transformation, mechanical and functional properties of EBF3-fabricated NiTi shape memory alloys. Under the optimized post-process heat treatment conditions, i.e., solution treatment at 1000 oC for 10 h followed by subsequent aging treatment at 500 oC for 4 h, the previously existing elongated Ti4Ni2Ox oxides were partially dissolved and interrupted into granular form and relatively uniformly distributed in the NiTi matrix. Meanwhile, the preexisting nanoscale Ni4Ti3 precipitates gradually transformed from clustered or segregated granular to a lenticular shape with the increase of the aging time. The martensite transformation routes also underwent an accompanying alteration, which changed from a one-step (B2-A ↔ B19’-M) to two-step (B2-A → R → B19’-M) transformation. Moreover, Ni4Ti3 precipitated with a coherent relationship of {123} B2-A //{11–20} Ni4Ti3 which increase the material strength by hindering dislocation movement and improve plasticity by providing a transition domain for accommodating deformation at the interface. The superelastic stability and narrow response hysteresis promoted by the presence of the R-phase are affected by residual (100) compound twins martensite in the NiTi matrix and the permanent plastic deformation activated in (011) [001] slip system of the B2-A phase. This deteriorates the superelastic recovery ratio from 83.6 to 57.4%, as observed after 10 loading-unloading cycles. The post-heat treatment regime presented in the current investigation can be used to modulate the material precipitation, phase transformation, as well as the mechanical and functional properties of EBF3-fabricated NiTi alloys. These results allow to extrapolate the potential for carefully selected post-heat treatment scheduled for additively manufacturing NiTi shape memory alloys.

materials science, multidisciplinary,nanoscience & nanotechnology,metallurgy & metallurgical engineering