Abstract:High strength-elongation synergy and its dependence on microstructure are the eternal themes of metallic materials including Ti alloys. In this study, the relationship between the microstructure evolution and mechanical properties of the Ti-25Zr-4Al-1.5Mn (TZAM, wt. %) near-α Ti alloy was systematically investigated after hot rolling at temperatures ranging in the whole solid solution region. The content of primary α phase decreased gradually with the increasing of rolling temperature. An excellent comprehensive mechanical properties with a yield strength of 1055±10 MPa and a total elongation of 23.6±0.6% were obtained for the specimen after rolling at 750 °C (single α phase temperature region). This great strength-elongation synergy is mainly due to the synthetic action of substructure strengthening, dislocation strengthening, basal random heterogeneity (BRH) texture, and suitable content of β phase. The α" martensitic phase was formed after rolling at temperatures of 800 and 850 °C (α + β two-phase temperature region), resulting in a significant decrease in yield strength. However, remarkable work hardening with a rate of approximately 10 GPa occurred in both specimens. The whole evolution process of primary α grains, namely dynamic recovery and recrystallization during hot-rolled is deeply discussed. When the rolling temperature increased to 900 °C (single β phase temperature region), the dominated acicular α´ martensitic phase with high dislocation density resulted in an ultra-high strength (1264±12 and 1488±11 MPa for yield and tensile strength respectively) at the expense of plasticity. These findings revealed the microstructure evolution and its relationship to the mechanical properties of a TiZr-based alloy after the thermomechanical processing and helped to understand deeply the theory of metallic strengthening and elongation.

The Microstructure and Linear Superelasticity of Cold-Drawn TiNi Alloy

Microstructural Evolution and Deformation Micromechanism of Cold-Deformed TiNi-Based Alloys

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

Microstructure of Surface and Subsurface Layers of a Ni-Ti Shape Memory Microwire.

Microstructure Regulation and Strength-Elongation Synergy of the Near Alpha TZAM Alloy Via Thermomechanical Processing

Hrem Studies of Twin Boundary Structure in Deformed Martensite in the Cold-Rolled Tini Shape Memory Alloy

Study of deformation micromechanism in cold-deformed TiNi based alloys

Strain states and unique properties in cold-rolled TiNi shape memory alloys

HREM studies on the deformed martensite in cold rolled TiNi alloy

Analysis of Mechanical-Thermal Coupled Experiments of Single Crystal TiNi Alloys

Microstructure and microhardness evolution of Ti-10V-2Fe-3Al alloy under tensile/torsional deformation modes

Microstructure evolution of a forged TiAl-Nb alloy during high-temperature tensile testing

Transformation Behaviors and Superelasticity of Ti 50 Ni 48 Fe 2 Shape Memory Alloy Subjected to Cold-Rolling and Subsequent Annealing

Room Temperature Deformation and Superelastic Behavior of TLM Titanium Alloy Under Different Solution Conditions

Revealing the microstructure evolution of the deformed superelastic NiTi wire by EBSD

High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy

Anomalous hot deformation behavior and microstructure evolution of as-cast martensitic NiTi alloy during hot compression

In-situ high energy X-ray diffraction study of microscopic deformation behavior of martensite variant reorientation in NiTi wire

Effect of Aging on Martensitic Transformation and Superelasticity of TiNiCr Shape Memory Alloy

Tribology behaviors of Ti–Ni51.5 at% shape memory alloy with different microstructures and textures

Effect of Cold Drawing and Annealing in Thermomechanical Treatment Route on the Microstructure and Functional Properties of Superelastic Ti-Zr-Nb Alloy