Abstract:This study investigated the collective evolution of martensite variant structures, the development of crystallographic textures and the load partitioning among the variants during tensile deformation in a commercial polycrystalline NiTi wire by means of in-situ high-energy X-ray diffraction technique. The cold-worked and then crystallized NiTi wire was found to have three fiber textures along the wire axial direction in its thermally formed self-accommodating B19′ martensite, including (<math>1¯</math>20)/(120), (<math>1¯</math>02) and (102). These textural orientations are inheritance of the texture of the B2 phase and are associated with the <011> type II twins and (001) compound twins. Tensile deformation via martensite variant reorientation converted the (102) and (120) fiber textures into (<math>1¯</math>02). The texture evolutions and variant selections are driven by the difference in d-spacing values between the pairing variants in each twin structure in order to achieve maximum elongation deformation in the tensile loading direction. At the meantime, the lattice strains of the favored variants increased whereas those of the unfavored variants decreased (even to negative) abruptly at the occurrence of the Lüders deformation event when at the global stress remained constant over the stress plateau. These changes of the lattice strains are attributed to load transfer and repartitioning among the variants. Based on the lattice strain measurements, the load partitioning among variants is also estimated.

HREM studies on the deformed martensite in cold rolled TiNi alloy

Hrem Studies of Twin Boundary Structure in Deformed Martensite in the Cold-Rolled Tini Shape Memory Alloy

HREM studies on the microstructure of severely cold-rolled TiNi alloy after reverse martensitic transformation

The Microstructure and Linear Superelasticity of Cold-Drawn TiNi Alloy

High-resolution Electron Microscopy Study on the Substructure of Ti–Ni–Hf B19′ Martensite

HREM Study on the Intervariant Structure of Ti-Ni-Hf B19′ Martensite

Microstructural Evolution and Deformation Micromechanism of Cold-Deformed TiNi-Based Alloys

MICROSTRUCTURE AND INTERFACE STRUCTUREOF Ti_(36)Ni_(49)Hf_(15) HIGH TEMPERATURESHAPE MEMORY ALLOY

Study of deformation micromechanism in cold-deformed TiNi based alloys

Novel deformation twinning system in a cold rolled high-strength metastable- Ti-5Al-5V-5Mo-3Cr-0.5Fe alloy

In-situ high energy X-ray diffraction study of microscopic deformation behavior of martensite variant reorientation in NiTi wire

TEM and HREM study of the interphase interface structure of Ti3Ni4 precipitates and parent phase in an aged TiNi shape memory alloy

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

Large-strain Lüders-type deformation of B19' martensite in Ni47Ti49Nb2Fe2 alloy

Analysis of Mechanical-Thermal Coupled Experiments of Single Crystal TiNi Alloys

In-situ synchrotron high energy X-ray diffraction study of micro-mechanical behaviour of R phase reorientation in nanocrystalline NiTi alloy

Deformation Dependence of Transformation Behavior of Ti-Ni-Nb Wide Hysteresis Shape Memory Alloy

Tribology behaviors of Ti–Ni51.5 at% shape memory alloy with different microstructures and textures

Revealing the microstructure evolution of the deformed superelastic NiTi wire by EBSD

Substructure and Boundary Structure of Deformed 18R Martensite in a Cu–Zn–Al Alloy

Effect of mechanical expanding on strain recovery characteristics and microstructures of TiNiNb shape memory alloy