Abstract:This study explores the electropulsing‐assisted solution (EAS) process for TiB2/Al composites, revealing how EAS enhances microstructure and mechanical properties. EAS boosts phase dissolution for only 15 min without overburning, stabilizes grain size, and improves strength and elongation. This study provides an approach to achieve an efficient dissolution of phases in particle‐reinforced Al matrix composites via electropulsing techniques. The traditional solution treatment is not completely applicable for in situ TiB2/Al–Zn–Mg–Cu composite due to the influence of TiB2 particles. This study investigates the impact of the electropulsing‐assisted solution (EAS) process on the microstructure evolution and mechanical properties of TiB2/Al–Zn–Mg–Cu composites. The nonuniform microstructure evolution related to the difference in temperature and current density is supported by simulative and experimental results. EAS treatment significantly enhances the degree of supersaturation, allowing phases surrounding TiB2 particles to dissolve without extensive overburning, unlike traditional solution treatments. This improvement is attributed to the reduced thermodynamic barrier and accelerated atomic diffusion, facilitated by both localized and average Joule heating effects and enhanced thermal electron/phonon scattering. Meanwhile, grain size remains stable during the temperature rise induced by EAS treatment. Furthermore, the mechanical properties of composites increase, among which the increase in strength is mainly ascribed to solid–solution strengthening, and the increase in elongation is related to multiple factors referring to TiB2 particles fracture and interface crack between the undissolved phases and matrix. This study provides an approach to achieve an efficient dissolution of phases aggregated with particles and without widespread overburning in particle‐reinforced Al matrix composites via electropulsing techniques.

Recrystallization behavior of a hot-rolled TiBw/TA15 composite under electropulsing heat treatment

The effects of electropulsing on the recrystallization behavior of rolled pure tungsten

Effect of Electropulsing Treatment on the Microstructure and Superelasticity of TiNi Alloy

Enhancement of Ductility, Weakening of Anisotropy Behavior and Local Recrystallization in Cold-Rolled Ti-6Al-4V Alloy Strips by High-Density Electropulsing Treatment

Mechanism of Electropulsing Induced Recrystallization in a Cold-Rolled Mg–9Al–1Zn Alloy

Effect of Electroplastic Treatment on Microstructure and Texture Changes of a Cold Rolling AZ31 Strip

Effect of Recovering Damage and Improving Microstructure in the Titanium Alloy Strip under High-Energy Electropulses

Effect of Electropulsing on Recrystallization of Fe-3%Si Alloy Strip

Enhanced α → β phase transition of Ti–6Al–2Zr–1Mo–1V alloy by the electropulsing

Microstructure Evolution and Mechanical Properties of In Situ TiB2/Al–Zn–Mg–Cu Composites by Electropulsing‐Assisted Solution Treatment

RETRACTED: Effect of Electropulsing Treatment on Microstructure and Mechanical Properties of Cold-Rolled Pure Titanium Strips

Improving in plasticity of orthorhombic Ti2AlNb-based alloys sheet by high density electropulsing

Influence of Electropulsing Treatment on the Recrystallization and Texture of Ni9W Alloy Strip

Effect of Electropulsing Treatment on Microstructure and Mechanical Properties of a Deformed ZrTiAlV Alloy

Effects of Electropulsing Treatment on the Element Diffusion Between Ti6Al4V and Commercially Pure Titanium

Effect of the electropulsing on microstructure and mechanical properties of the cold-drawing copper wire

Effect of Heat Treatment on Microstructure Evolution and Mechanical Properties of 2.5 vol% TiBw/TA15 Composites with Different Deformation Statuses

A Comparative Study on the Static Recrystallization Behavior of Cold-Rolled Mg-3Al-1Zn Alloy Stimulated by Electropulse Treatment and Conventional Heat Treatment

Evolution behavior of abnormal β grain region in Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy under the electropulsing treatment

Microstructure and texture evolution of the cold-rolled AZ91 magnesium alloy strip under electropulsing treatment

Texture Evolution and Mechanical Behavior of Commercially Pure Ti Processed Via Pulsed Electric Current Treatment