Abstract:This study explores the electropulsing‐assisted solution (EAS) process for TiB2/Al composites, revealing how EAS enhances microstructure and mechanical properties. EAS boosts phase dissolution for only 15 min without overburning, stabilizes grain size, and improves strength and elongation. This study provides an approach to achieve an efficient dissolution of phases in particle‐reinforced Al matrix composites via electropulsing techniques. The traditional solution treatment is not completely applicable for in situ TiB2/Al–Zn–Mg–Cu composite due to the influence of TiB2 particles. This study investigates the impact of the electropulsing‐assisted solution (EAS) process on the microstructure evolution and mechanical properties of TiB2/Al–Zn–Mg–Cu composites. The nonuniform microstructure evolution related to the difference in temperature and current density is supported by simulative and experimental results. EAS treatment significantly enhances the degree of supersaturation, allowing phases surrounding TiB2 particles to dissolve without extensive overburning, unlike traditional solution treatments. This improvement is attributed to the reduced thermodynamic barrier and accelerated atomic diffusion, facilitated by both localized and average Joule heating effects and enhanced thermal electron/phonon scattering. Meanwhile, grain size remains stable during the temperature rise induced by EAS treatment. Furthermore, the mechanical properties of composites increase, among which the increase in strength is mainly ascribed to solid–solution strengthening, and the increase in elongation is related to multiple factors referring to TiB2 particles fracture and interface crack between the undissolved phases and matrix. This study provides an approach to achieve an efficient dissolution of phases aggregated with particles and without widespread overburning in particle‐reinforced Al matrix composites via electropulsing techniques.

Enhanced α → β phase transition of Ti–6Al–2Zr–1Mo–1V alloy by the electropulsing

Retracted: Effect of High‐Energy Electropulsing on the Phase Transition and Mechanical Properties of Two‐Phase Titanium Alloy Strips

A shortened process of tri-modal microstructure developing in Ti-6Al-4V alloy via electropulsing-induces grain spheroidization

Ti-6Al-4V alloy strengthening via instantaneous phase transformation induced by electropulsing

Evolution behavior of abnormal β grain region in Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy under the electropulsing treatment

Electropulsing-induced Phase Transformations in a Zn-Al-based Alloy

A Novel Electropulsing Treatment to Improve the Surface Strength and Repair the Pore of Additively Manufactured Ti-6Al-4V Alloy

p Introducing omega and O ' nanodomains in Ti-6Al-4V: The mechanism of accelerating alpha ->beta transformation kinetics via electropulsing

On the Thermodynamics and Kinetics of Electropulsing Induced Dissolution of Β-Mg17al12 Phase in an Aged Mg–9Al–1Zn Alloy

RETRACTED: Influence of Electropulsing Globularization on the Microstructure and Mechanical Properties of Ti–6Al–4V Alloy Strip with Lamellar Microstructure

Microstructural Modification and Mechanical Improvement of Ultrafine-Grained Ti Alloy Through Electron Wind Force: an Innovative Approach

Introducing Ω and O′ Nanodomains in Ti-6Al-4V: the Mechanism of Accelerating Α → Β Transformation Kinetics Via Electropulsing

Ultrahigh Deformability of Ti-6Al-4V Assisted by High-Density Pulsed Electric Current Treatment

Enhancement of Ductility, Weakening of Anisotropy Behavior and Local Recrystallization in Cold-Rolled Ti-6Al-4V Alloy Strips by High-Density Electropulsing Treatment

Recrystallization behavior of a hot-rolled TiBw/TA15 composite under electropulsing heat treatment

A novel strategy for preparation of α′ + β Dual-phase microstructure through heating massive-like transformation induced by Electropulsing in Ti-6Al-4V Alloy

Electropulsing-induced Phase Transformations and Their Effects on the Single Point Diamond Turning of a Tempered Alloy AZ91

Microstructure Evolution and Mechanical Properties of In Situ TiB2/Al–Zn–Mg–Cu Composites by Electropulsing‐Assisted Solution Treatment

Microstructures and Mechanical Properties of Additive Connecting Ti-6.5Al-2Zr-1Mo-1V Alloy by High Frequency Pulse TIG Technology

Surface electropulsing-induced texture evolution in electron beam melted Ti-6Al-4V alloy for biomedical application

Retracted: Effects of High-Energy Electro-Pulsing Treatment on Microstructure, Mechanical Properties and Corrosion Behavior of Ti-6al-4v Alloy (retracted Article. See Vol.90, Pg.781, 2018)