Abstract:Electrically assisted forming (EAF) has been increasingly utilized as an effective auxiliary processing technology to improve the formability of hard-to-deform metals. Previous works have revealed that the phase transformation of titanium alloys subjected to electropulsing treatment (EPT) can occur at a lower temperature and in a remarkably shorter time compared with those subjected to the traditional heating treatment (THT). However, an in-depth experimental verification and further analysis is still missing so far. Therefore, to characterize the specific effects of EPT on alpha -> beta transformation process, both EPT and THT experiments were conducted on Ti-6Al-4V sheet specimens. After that, a calculation method based on the analysis of optical microscopic (OM) metallographs was developed to characterize the amount of phase transformation in EPT and THT. According to the results, it was found that the pulse current can significantly reduce the phase transus temperature and accelerate the transformation process in EPT compared with that in THT. Furthermore, the specific effects of EPT on transus temperature and phase transformation rate were investigated in detail. Based on that, the transformation kinetics of the electropulsing-induced alpha -> beta phase transformation was also analyzed using the Johnson-Mehl-Avrami model. It is revealed that the activation energies of both nucleation and growth of phase transformation are reduced by electric current. Hence, the phase transformation can start at a lower temperature and with a higher rate in EPT. The mechanism behind the effects was also discussed in detail in the present work.

Electropulsing-induced Phase Transformations in a Zn-Al-based Alloy

Electropulsing-induced Phase Transformations and Their Effects on the Single Point Diamond Turning of a Tempered Alloy AZ91

Effect of Electropulsing Treatment on Microstructure and Mechanical Properties of a Deformed ZrTiAlV Alloy

Effects of Electropulsing on Microstructure and Conductivity of Nanofilms of Zn-Al Alloys

On the Thermodynamics and Kinetics of Electropulsing Induced Dissolution of Β-Mg17al12 Phase in an Aged Mg–9Al–1Zn Alloy

Mechanism of Electropulsing Induced Recrystallization in a Cold-Rolled Mg–9Al–1Zn Alloy

Electropulsing-Induced Α to Β Phase Transformation of Ti–6Al–4V

Static Electropulsing-Induced Microstructural Changes and Their Effect on the Ultra-Precision Machining of Cold-Rolled AZ91 Alloy

Influence of Electropulsing Treatment on Microstructure and Mechanical Properties of Cold-Rolled Mg–9Al–1Zn Alloy Strip

Effect of Electropulsing Treatment on Microstructure and Tensile Fracture Behavior of Aged Mg–9Al–1Zn Alloy Strip

Effect of Electropulsing Treatment on Solid Solution Behavior of an Aged Mg Alloy AZ61 Strip

Improved Ductility of Aged Mg-9Al-1Zn Alloy Strip by Electropulsing Treatment

Microstructure and Mechanical Properties of Cold-Rolled Mg-6Al-1Zn Alloy Strip Treated by Electropulsing Treatment

Improved Plasticity of Mg–Al–Zn Alloy by Electropulsing Tension

Enhanced α → β phase transition of Ti–6Al–2Zr–1Mo–1V alloy by the electropulsing

Microstructure and texture evolution of the cold-rolled AZ91 magnesium alloy strip under electropulsing treatment

Effect of Electropulsing on Recrystallization of Fe-3%Si Alloy Strip

Electropulsing-Induced Strengthening Of Steel At High Temperature

Microstructure and Texture Evolution of Magnesium Alloys During Electropulse Treatment

Effect of Electropulsing Treatment on Microstructure and Mechanical Properties of Intermetallic Al3ti Alloy

Microstructural Modification and Mechanical Improvement of Ultrafine-Grained Ti Alloy Through Electron Wind Force: an Innovative Approach