Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Magnesium alloys exhibit poor formability at room temperature owing to their hexagonal close-packed crystal structure. In this study, a multi-step preform and electropulsing treatment method was applied to the plastic deformation of AZ31B magnesium alloy to improve its cumulative ductility. The mechanical properties, microstructure, and dislocation evolution were investigated using various parameters. The cumulative elongation of all specimens increased significantly, with the maximum approximately twofold higher for the initial specimens. Although the yield strength decreased after the first step, it increased with the following steps. After electropulsing treatment, the specimens were recrystallized and the dislocations were annihilated. The deformed microstructure caused by preform recovered and the recovery degree was associated with the preform and electropulsing treatment parameters. Therefore, the preform and electropulsing treatment method is effective to enhance the ductility of AZ31B magnesium alloy at room temperature, and a set of appropriate pulse current parameters can achieve satisfactory strength and elongation results. Moreover, the effect of the pulse current on the dislocation mobility and climb mainly accounts for the beneficial restoration during the preform and electropulsing treatment process.

Enhancement of Ductility in Mg-3Al-1Zn Alloy with Tilted Basal Texture by Electropulsing

Texture Evolution in Cold-Rolled AZ31 Magnesium Alloy During Electropulsing Treatment

Microstructure and texture evolution of the cold-rolled AZ91 magnesium alloy strip under electropulsing treatment

Improved Ductility of Aged Mg-9Al-1Zn Alloy Strip by Electropulsing Treatment

Microstructure and texture evolution of cold-rolled Mg-3Al-1Zn alloy by electropulse treatment stimulating recrystallization

Influence of Electropulsing Treatment on Microstructure and Mechanical Properties of Cold-Rolled Mg–9Al–1Zn Alloy Strip

Microstructure and Texture Evolution of Magnesium Alloys During Electropulse Treatment

Improved Plasticity of Mg–Al–Zn Alloy by Electropulsing Tension

Dynamic Electropulsing Induced Evolution of Basal Texture and Its Effect on Properties of Magnesium Alloy Az61

Microstructure and Mechanical Properties of Cold-Rolled Mg-6Al-1Zn Alloy Strip Treated by Electropulsing Treatment

Texture Modification of Magnesium Alloys During Electropulse Treatment

Microstructural Modification and Mechanical Improvement of Ultrafine-Grained Ti Alloy Through Electron Wind Force: an Innovative Approach

Effect of Electropulsing Treatment on Microstructure and Tensile Fracture Behavior of Aged Mg–9Al–1Zn Alloy Strip

Effect of electropulsing treatment on the recovery of AZ31B magnesium alloy

Improved Mechanical Properties of Mg–9Al–1Zn Alloy by the Combination of Aging, Cold-Rolling and Electropulsing Treatment

Evading Strength-Ductility Tradeoff in Mg Alloy via Uniform Microstructure and Unique Texture Modification Induced by Moderate Temperature ECAP

Enhanced Electroplasticity through Room-Temperature Dynamic Recrystallization in a Mg-3Al-1Sn-1Zn Alloy

Enhancement of Ductility, Weakening of Anisotropy Behavior and Local Recrystallization in Cold-Rolled Ti-6Al-4V Alloy Strips by High-Density Electropulsing Treatment

Effect of Electroplastic Treatment on Microstructure and Texture Changes of a Cold Rolling AZ31 Strip

Plastic deformation of AZ31B magnesium alloy in the preform and electropulsing treatment process

Mechanism of Electropulsing Induced Recrystallization in a Cold-Rolled Mg–9Al–1Zn Alloy