Abstract:High‐temperature oxidation (1050°C) of Yb‒Y‐modified SrZrO3 [Sr.9(Zr.9Yb.05Y.05)O2.85, SZYY] thermal barrier coatings by suspension plasma spraying and growth behavior of thermally grown oxide (TGO) were investigated. The main component of early TGO is α‐Al2O3. It has a very low oxygen ion diffusivity and provides an excellent diffusion barrier, which has a positive effect on preventing further bond coating (BC) oxidation. The main component of early TGO is α‐Al2O3. It has a very low oxygen ion diffusivity and provides an excellent diffusion barrier, which has a positive effect on preventing further BC oxidation. High‐temperature oxidation (1050°C) of Sr.9(Zr.9Yb.05Y.05)O2.85 (SZYY) thermal barrier coatings (TBCs) by suspension plasma spraying (SPS) and growth behavior of thermally grown oxide (TGO) were investigated. When the TBCs were exposed to high temperature for a period of time (∼5 h), the BC oxidized and TGO inevitably formed between the bond coating (BC) and the ceramic top coating (TC). The high‐temperature oxidation behavior of the BC is generally manifested as the growth of TGO, which has four specific stages as follows: (1) formative oxidation stage (0‒10 h), (2) rapid oxidation stage (10‒50 h), (3) stable oxidation stage (50‒100 h), and (4) complex oxidation stage (100‒200 h). The main component of early TGO is α‐Al2O3. It has a very low oxygen ion diffusivity and provides an excellent diffusion barrier, which has a positive effect on preventing further BC oxidation. However, as the heat treatment time increased, the Al consumption and the formation of a CNS layer (NiO, Co3O4, and spinel) in the BC eventually led to coating failure. The working life of TBCs can be improved by improving the ceramic TC structure and the Al content of BC. SZYY‐TBCs have certain potential application value.

TGO stress growth for Pt-modified aluminide bond coats during high temperature oxidation

Influence factors of high temperature oxidation for Pt-modified-aluminide bond coatings

Different Growth Mechanisms of Alumina on the Surface of NiPtAl and MCrAlY Bondcoatings in EB-PVD TBC System

Influences of MCrAlY Coatings and TBCs on Oxidation Behavior of a Ni-Based Single Crystal Superalloy

Oxidation Behaviors of the NiCrAlY Bond Coats in the Thermal Barrier Coatings under External Loads

Effect of Thermal Growth Oxide Composition and Morphology on Local Stresses in Thermal Barrier Coatings

Effect of TGO on the Tensile Failure Behavior of Thermal Barrier Coatings

Microstructure Analysis of Initial Alumina of Pt-Modified Aluminide Coatings on Ni-Based Alloy

Isothermal oxidation and TGO growth behavior of NiCoCrAlY-YSZ thermal barrier coatings on a Ni-based superalloy

The failure behavior of thermally grown oxide of the AlCoCrFeNi bond coating prepared by atmospheric plasma spray at 900–1000 °C

High‐temperature oxidation and TGO growth behavior of Sr.9(Zr.9Yb.05Y.05)O2.85 thermal barrier coatings

Effect of Tensile Load on High Temperature Oxidation of CoNiCrAlY Coating

High-temperature performance of Pt-modified Ni-20Co-28Cr-10Al-0.5Y coating: Formation mechanism of Pt-rich overlayer and its effect on thermally grown oxide failure

Oxidation Behavior and Oxide Transformation of a Pt-Modified Aluminide Coating at Moderate High Temperature

Characterisation and Oxidation Behaviour of Plasma Surface Alloyed on Γ-Tial Alloy

Impact of Pt/Al ratios on the cyclic oxidation and TCP precipitation of β-(Ni, Pt)Al coated superalloy at 1150 °C

Influence of “Island-Like” Oxides in the Bond-Coat on the Stress and Failure Patterns of the Thermal-Barrier Coatings Fabricated by Atmospheric Plasma Spraying During Long-Term High Temperature Oxidation

Comparative study of temperature-dependent oxidation and interdiffusion behavior on NiCoCrAlYHf-coated nickel-based single-crystal superalloys

Numerical Analysis of stress evolution in thermal barrier coating system during two-stage growth of heterogeneous oxide

High-temperature Oxidation and TGO Growth Behavior of Sr.9(Zr.9Yb.05Y.05)O2.8 5 Thermal Barrier Coatings

Influence of Composition of TGO on the Thermal Shock Lifetime of Thermal Barrier Coatings with Cold-Sprayed MCrAlTaY Bond Coat