Abstract:The reliability and stability of MEMS electrostatic comb resonators have become bottlenecks in practical applications. However, there are few studies that comprehensively consider the nonlinear dynamic behavior characteristics of MEMS systems and devices in a coupled field so that the related simulation accuracy is low and cannot meet the needs of design applications. In this paper, to avoid the computational complexity and the uncertainty of the results of three-field direct coupling and take into the damping nonlinearity caused by coupled fields, a novel electrostatic-fluid-structure three-field indirect coupling method is proposed. Taking an actual microcomb resonant electric field sensor as an example, an electrostatic-fluid-structure multiphysics coupling 3D finite element simulation model is established. After considering the influence of nonlinear damping concerning the large displacement of the structure and the microscale effect, multifield coupling dynamics research is carried out using COMSOL software. The multiorder eigenmodes, resonant frequency, vibration amplitude, and the distribution of fluid load of the microresonator are calculated and analyzed. The simulated data of resonance frequency and displacement amplitude are compared with the measured data. The results show that the fluid load distribution of the microelectrostatic comb resonator along the thickness direction is high in the middle and low on both sides. The viscous damping of the sensor under atmospheric pressure is mainly composed of the incompressible flow damping of the comb teeth, which is an order of magnitude larger than those of other parts. Compared with the measured data, it can be concluded that the amplitude and resonance frequency of the microresonator considering the nonlinear damping force and residual thermal stress are close to the experimental values (amplitude error: 15.47%, resonance frequency error: 12.48%). This article provides a reference for studies on the dynamic characteristics of electrostatically driven MEMS devices.

Stiction Failure Mechanisms of the Micromachined Electrostatic Comb-Drive Structures

RESEARCH ON PULL-IN AND RELEASE PHENOMENON OF ELECTROSTATIC MICROPUMPS

Control of Micro Stick-Slip and Stiction in MEMS

Multi-physics Analysis of an Electrostatically Actuated Microcantilever in Viscous Fluids

Adhesion-Induced Failure of the Slender Mems Structures

Study on the design of anti-sticking structures in MEMS under different forces

Macro modeling method for electrostatic-drive silicon diaphragm

Thermal Stress Analysis of MEMS Accelerometer Based on Finite Element Method

Intermittent Failure Mechanism and Stabilization of Microscale Electrical Contact

Analysis of Lateral Stability of Electrostatic Comb-drive Structure

Mechanical stability and sticking problem of a membrane strip structure in MEMS under Casimir forces

Modeling of Contact and Stiction in Electrostatic Microcantilever Actuators

MEMS Reliability Review

Theoretical Study of the Sticking of a Membrane Strip in MEMS under the Casimir Effect

Driving Principle and Stability Analysis of Vertical Comb-Drive Actuator for Scanning Micromirrors

Friction and Wear Properties of Microstructures in MEMS

The Response of Electrostatic MEMS Structure under Mechanical Shock and Electrostatic Forces

Friction and wear properties in MEMS

Electrostatic-Fluid-Structure 3D Numerical Simulation of a MEMS Electrostatic Comb Resonator

Coupled Simulative Analysis for Drive Characteristic of Micro-Comb Structure