Abstract:The microfibrous structured catalytic packings for miniature fuel processor consisting of a methanol steam reformer and a subsequent CO cleanup train has been investigated experimentally. A highly void and tailorable sinter-locked microfibrous carrier consisting of 3.5vol% 8μm diameter Ni-fibers is used to entrap 35vol% 150–250μm catalyst particulates for both methanol steam reforming (MSR) and CO preferential oxidation (PROX). We demonstrate a microfibrous entrapped Pd-ZnO/Al2O3 catalyst packings for high efficiency hydrogen production by the MSR reaction. The use of microfibrous entrapment technology significantly enhances the catalyst utilization efficiency by a 4-fold improvement of the weight hourly space velocity (WHSV), compared to the single Pd–ZnO/Al2O3 particulates as keeping the methanol conversion at >98%. The microfibrous entrapped Pt–Co/Al2O3 catalyst packings can drive the CO from 2% down to <50ppm at 150°C with O2/CO ratio of 1 using a gas hourly space velocity (GHSV) of 32,000h−1. Finally, a prototype fuel processor system integrating MSR reformer and CO PROX train is demonstrated as three reactors in series. Such test rig is capable of producing roughly 1700 standard cubic centimeter per minute (sccm) PEMFC-grade H2 (equivalent to ∼163W of electric power) in a longer-term test, in which the MSR reactor is operated at 300°C using a methanol/water (1/1.1, mole) mixture WHSV of 9h−1 and CO PROX reactors at 150°C using an O2/CO molar ratio of 1.3, respectively. In the test of this prototype system, MSR reactor delivers >97% methanol conversion throughout the entire 1200-h test; the CO cleanup train placed in line after 800-h MSR illustrates the capability to decrease the CO concentration from ∼3.5% to ∼1% at PROX-1 and then to less than 20ppm at PROX-2 until to the end of test.

Microfibrous structured catalytic packings for miniature methanol fuel processor: Methanol steam reforming and CO preferential oxidation

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

A Novel Structured PdZnAl/Cu Fiber Catalyst for Methanol Steam Reforming in Microreactor

Investigation of a methanol processing system comprising of a steam reformer and two preferential oxidation reactors for fuel cells

A novel thermally autonomous methanol steam reforming microreactor using SiC honeycomb ceramic as catalyst support for hydrogen production

Syngas CO cleaning for fuel cell applications by preferential oxidation: catalyst development and reactor design

Hydrogen Production from Cylindrical Methanol Steam Reforming Microreactor with Porous Cu-Al Fiber Sintered Felt

Study on Performance of Laminated Porous Metal Fiber Sintered Felt as Catalyst Support for Methanol Steam Reforming Microreactor

A Monolith CuNiFe/γ-Al2O3/Al Catalyst for Steam Reforming of Dimethyl Ether and Applied in a Microreactor

ZnO-supported Palladium Catalysts Via Ball Milling As an Effective Heterogeneous Catalyst for Methanol Steam Reforming

Robust Mesh-type Structured CuFeMg/γ-Al2O3/Al Catalyst for Methanol Steam Reforming in Microreactors

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

Producing hydrogen by catalytic steam reforming of methanol using non-noble metal catalysts

Development of a microchannel reactor concerning steam reforming of methanol

Performances of a methanol reforming microreactor with gradient porosity fiber support for hydrogen production

Fast Start-Up Structured CuFeMg/Al2O3 Catalyst Applied in Microreactor for Efficient Hydrogen Production in Methanol Steam Reforming