Abstract:ConspectusCarbon dioxide emissions from consumption of fossil fuels have caused serious climate issues. Rapid deployment of new energies makes renewable energy driven CO2 electroreduction to chemical feedstocks and carbon-neutral fuels a feasible and cost-effective pathway for achieving net-zero emission. With the urgency of the net-zero goal, we initiated our research on CO2 electrolysis with emphasis on industrial relevance.The CO2 molecules are thermodynamically stable due to high activation energy of the two C═O bonds, and efficient electrocatalysts are required to overcome the sluggish dynamics and competitive hydrogen evolution reaction. The CO2 electrocatalysts that we have explored include molecular catalysts and nanostructured catalysts. Molecular catalysts are centered on earth abundant elements such as Fe and Co for catalyzing CO2 reduction, and using Fe catalysts, we proposed an amidation strategy for reduction of CO2 to methanol, bypassing the inactive formate pathway. For nanostructured catalysts, we developed a carbon enrichment strategy using nitrogen-rich nanomaterials for selective CO2 reduction.Direct CO2 electroreduction from the flue gas stream represents the "holy grail" in the field, because typical CO2 concentration in flue gas is only 6-15%, posing a significant challenge for CO2 electrolysis. On the other hand, direct electroreduction of CO2 in the flue gas eliminates the carbon capture process and simplifies the overall carbon capture and utilization (CCU) scheme. However, direct flue gas reduction is frustrated by the reactive oxygen (5-8%), low CO2 concentration (6-15%), and potentially toxic impurities. Surface CO2 enrichment catalysts with high O2 tolerance could be viable for achieving direct CO2 electroreduction for decarbonization of flue gas.In addition to the electrocatalysts, the incorporation of catalysts into the electrolyzer and development of a suitable process was also investigated to meet industrial demands. A membrane electrode assembly (MEA) is a zero-gap configuration with cathode and anode catalysts coated on either side of an ion exchange membrane. We adopted the MEA configuration due to the structural simplicity, low ohmic resistance, and high efficiency. The electrode factors (for example, membrane type, catalyst layer porosity, and MEA fabrication method) and the electrolyzer factors (for example, flow channels, gas diffusion layer) are critical to highly efficient operation. We separately developed an anion-exchange membrane-based system for CO production and cation-exchange membrane-based system for formate production. The optimized electrolyzer configuration can generate uniform current and voltage distribution in a large-area electrolyzer and operate using an industrial CO2 stream. The optimized process was developed with the targets of long-term continuous operation and no electrolyte consumption.

Syngas CO cleaning for fuel cell applications by preferential oxidation: catalyst development and reactor design

Innovative Charge-Tuning for Highly Dispersed Pt Catalysts: Achieving Deep CO Removal in Industrial H2 Purification for Fuel Cells

Recent progress in catalytical CO purification of H2-rich reformate for proton exchange membrane fuel cells

Prevention of Active-Site Destruction During the Synthesis of High Performance Non-Pt Cathode Catalyst for Fuel Cells

Innovative Charge-Tuning for Highly Dispersed Pt Catalysts: Achieving Deep CO Removal in Industrial H 2 Purification for Fuel Cells

Carbon monoxide powered fuel cell towards H2-onboard purification

Gas phase electrochemical conversion of humidified CO2 to CO and H2 on proton-exchange and alkaline anion-exchange membrane fuel cell reactors

Atomically dispersed iron hydroxide anchored on Pt for preferential oxidation of CO in H 2

Selective conversion of propane by electrothermal catalysis in proton exchange membrane fuel cell.

Atomically dispersed iron hydroxide anchored on Pt for preferential oxidation of CO in H2

Low‐temperature preferential CO oxidation in a hydrogen‐rich stream over Pt‐NaY and modified Pt‐NaY catalysts for fuel cell application

CO-tolerance behaviors of proton exchange membrane fuel cell stacks with impure hydrogen fuel

Investigation of a methanol processing system comprising of a steam reformer and two preferential oxidation reactors for fuel cells

Fully-exposed Pt-Fe cluster for efficient preferential oxidation of CO towards hydrogen purification

Key CO2 capture technology of pure oxygen exhaust gas combustion for syngas-fueled high-temperature fuel cells

Reforming of Methane with Oxygen and Carbon Dioxide to Produce Syngas over A Novel Pt/Coal2o4/Al2o3 Catalyst

Advances in CO-tolerant anode catalysts for proton exchange membrane fuel cells

Designing and multi-evaluation of a promising gas-emission anode for eliminating CO 2 accumulation in microfluidic fuel cell

Single-atom catalysts for proton exchange membrane fuel cell: anode anti-poisoning & characterization technology

Oxygen Reduction Electrocatalysts in Proton Exchange Membrane Fuel Cells

CO 2 Electrolysis System under Industrially Relevant Conditions