Abstract:A zeolite/polymer composite hollow fiber (CHF) support is used to investigate the effects of three different silica sources (sodium metasilicate nonahydrate, silica sol and sodium silicate) of the synthesis hydrogel on the properties of zeolite LTA membrane prepared on the outer surface of the support by in situ hydrothermal synthesis at 100°C. The as-synthesized membranes and powders from the synthesis hydrogel are characterized by X-ray diffraction. The morphology and thickness of the membranes are observed by scanning electron microscopy. The separation factor and flux are evaluated by pervaporation (PV) test at 75°C using 90wt.% ethanol aqueous solution. It is difficult to obtain high performance membranes on the CHF support using sodium metasilicate nonahydrate as silica source, while continuous zeolite membranes with high separation factor (>10,000) and flux (>6.4kg/m2h) can be well synthesized using silica sol or sodium silicate as silica source. The reason of these differences is further explored by changing the alkalinity of the synthesis hydrogel (the content of sodium hydroxide). It is found that the crystallization rate of the synthesis hydrogel is a crucial factor to obtain zeolite membranes with high PV performance by static in situ hydrothermal synthesis. The separation performance of the membrane synthesized even using sodium metasilicate nonahydrate as silica source can be greatly improved by dynamic hydrothermal synthesis using rotating autoclaves.

High-Temperature Synthesis of Zeolite Y

High Temperature Synthesis of High Silica Zeolite Y with Good Crystallinity in the Presence of N-methylpyridinium Iodide.

Effects of the synthesis hydrogel on the formation of zeolite LTA membranes

Control of crystallization rate and morphology of zeolite silicalite-1 in solvent-free synthesis

Synthesis of Mesoporous Molecular Sieves with Secondary Building Units of Y Zeolite by Using Surfactants in Low Concentration as Template

High-silica zeolite Y: seed-assisted synthesis, characterization and catalytic properties

High-temperature Synthesis of Ordered Mesoporous Silicas from Solo Hydrocarbonsurfactants and Understanding of Their Synthetic Mechanisms

A high‐resolution solid‐state NMR study on nano‐structured HZSM‐5 zeolite

Highly efficient synthesis of high-silica SSZ-13 zeolite by interzeolite transformation of L zeolite at higher temperature

Synthesis and Influence Factors Study of 4A Molecular Sieve via Halloysite

High temperature synthesis of hydrothermally stable micro-mesoporous silica and Al-doped mesoporous silica via rigid template

Generalized High-Temperature Synthesis Of Zeolite Catalysts With Unpredictably High Space-Time Yields (Stys)

Templating of high-silica zeolites by tetrahydrofuran in the Na2O – SiO2 – Al2O3 – H2O system

Synthesis and Characterization of Ordered Mesoporous Aluminosilicate Molecular Sieves with High Stability in High-Temperature Steam

Synthesis of High-silica ZSM-5 Zeolite by Vapor-phase Transport Method

Synthesis of Meso-/Macroporous Zeolite (Fe,al)-Zsm-5 Microspheres from Diatomite

Hydrothermal crystallization of zeolite Y from Na2O-Fe2O3-Al2O3-SiO2-H2O system

Prepared hydrophobic Y zeolite for adsorbing toluene in humid environment

Understanding of the High Hydrothermal Stability of the Mesoporous Materials Prepared by the Assembly of Triblock Copolymer with Preformed Zeolite Precursors in Acidic Media

Thermal and hydrothermal stability of siliceous Y zeolite and its application to high-temperature catalytic combustion

Synthesis of high silica MOR zeolite in amine-free and fluoride-free ether-containing reactant system