Abstract:Potentiodynamic study was carried out on nickel in Na 2 SO 4 solution in the presence of ClO 4 – , WO 4 2– , MoO 4 2– , NO 2 – and NO 3 – ions. The anodic excursion spans of the metal nickel in a solution of Na 2 SO 4 are marked by the appearance of clearly defined anodic peak, passive region, and transpassive shoulder. According to the data, the anodic peak current density (I PAI ) rise from 1.82 to 8.12 mA cm –2 as the concentration of the Na 2 SO 4 solution rises from 0.2 to 1.0 M. It is clear that as scan rate increases, the I PAI rises reaching to 11.8 mA cm –2 . The apparent activation energy of nickel corrosion in Na 2 SO 4 is 33.25 kJ mol –1 . ClO 4 – anion addition speeds up nickel's active dissolution, as well tends to break down the passive layer, and causes pitting penetration. It was found that, the pitting potential (E pit ) of nickel in solutions containing the two anions ClO 4 – and SO 4 2– shifts to the positive direction by addition of WO 4 2– , MoO 4 2– , NO 2 – anions and shifts to the negative direction by addition NO 3 - anion. E pit increased by 0.67, 0.37 and 0.15 V in the presence of WO 4 2– , MoO 4 2– and NO 2 – , respectively. WO 4 2– > MoO 4 2– > NO 2 – was the order in which the inhibitors were most effective.

Influence of Deep-sea Environment on Corrosion Behavior of Pure Nickel Ⅲ-Influence of Hydrostatic Pressures on Pitting Mechanism for Pure Nickel

Influence of Ni Addition on Corrosion Performance of Medium-temperature Filler Metal with Low Cu Content for Al Brazed Joints

Effect of Dissolved Oxygen on Pitting Corrosion Behavior of Low-Alloy Steel under Hydrostatic Pressure

Electrochemical corrosion behavior of high strength steel in simulated deep-sea environment under different hydrostatic pressure

Corrosion of high-strength steel in 3.5% NaCl solution under hydrostatic pressure: Initial corrosion with tensile stress coupling

Tribocorrosion of 316L stainless steel by in-situ electrochemical methods under deep-sea high hydrostatic pressure environment

Effect of hydrostatic pressure on the galvanic corrosion of 90/10 Cu-Ni alloy coupled to Ti6Al4V alloy

Effect of hydrostatic pressure on galvanic corrosion of low-alloy steel in simulated deep-sea environments

Corrosion of high-strength steel in 3.5% NaCl solution under hydrostatic pressure: understanding electrochemical corrosion with tensile stress coupling

Study on the mechanism of hydrostatic pressure promoting electrochemical corrosion of pure iron in 3.5% NaCl solution

Microscopic investigation on pitting corrosion of Ni-Cr-Mo-V high-strength steel weldment in simulated deep-sea environment

Insights into the Electrochemical Corrosion Behavior and Mechanism of Electroless Ni-P Coating in the CO2/H2S/Cl− Environment

Effect of hydrostatic pressure on the pitting corrosion of 17-4PH martensitic stainless steel

Insight to corrosion mechanism of 90/10 copper-nickel alloys under different sea depths

Influence of Hydrostatic Pressure on the Pitting Corrosion Behavior of API X80 Steel

Pitting corrosion of 2Cr13 stainless steel in deep-sea environment

Impact of some inorganic anions on the corrosion of nickel in a solution containing Na2SO4 and NaClO4

Microstructure and Corrosion Behavior of Electrodeposited Nickel Prepared from a Sulphamate Bath

Effect of Ni on the oxidation behavior of corrosion products that form on low alloy steel exposed to a thin electrolyte layer environment

Corrosion behavior and mechanism of laser additive manufactured Ni-based alloy in CO2 environment at different temperatures and pressures

Effect of Hydrostatic Pressure on Passivating Power of Corrosion Layers Formed on 6061 T6 Aluminium Alloy in Sea Water