Abstract:The corrosion of materials in sea environment are generally caused by salt spray, tidal action and adhesion of marine organisms. It is necessary to ensure the materials possess the required strength and good corrosion resistance during operation. Although the existing Ni-W-P electroless plating can provide a certain degree of corrosion protection, its corrosion resistance is still limited under harsh marine condition. SiO2 nanoparticles have received extensive concern due to their excellent corrosion resistance, which has been considered as potential candidates for enhancing corrosion resistance in multicomponent electroless coatings. In this study, the electroless Ni-W-P coatings with SiO2 nanoparticles co-deposition on the Q235 substrate was prepared. The coating was characterized through scanning electron microscopy (SEM), X-ray diffraction (XRD), polarization techniques, and electrochemical impedance spectroscopy (EIS). As a result, the Ni-W-P coating co-deposited with SiO2 nanoparticles demonstrates superior corrosion resistance compared to the pure Ni-W-P coating. The surface of SiO2 nanoparticles contain three distinct bonded hydroxyl functional groups, which can influence the ionic reaction in the plating solution and the deposition of elements in the coating. After modified by PVA, it can be uniformly dispersed in the coating, and the composite coating with SiO2 nanoparticles co-deposited is transformed into a nanocrystalline structure. The even distribution of SiO2 nanoparticles fill the defects within the coating, leading to a reduction in porosity, permeability, and susceptibility to penetration of corrosive media. Concurrently, the nanoparticles facilitate surface passivation, forming a stable interface with substrate and coating that inhibits electrochemical reactions and diminishes the rate of self-corrosion reactions. The good and stable corrosion resistance is achieved at the SiO2 concentration of 9 g/L and PVA concentration of 1.08 g/L. These findings offer valuable insights for addressing corrosion challenges in the field of marine engineering.

Insights into the Electrochemical Corrosion Behavior and Mechanism of Electroless Ni-P Coating in the CO2/H2S/Cl− Environment

Characterization and corrosion behavior of electroless Ni-Mo-P/Ni-P composite coating in CO2/H2S/Cl− brine: Effects of Mo addition and heat treatment

Time-dependent corrosion behavior of electroless Ni–P coating in H2S/Cl− environment

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Progress in Research on Ni-Based Protective Coatings for Downhole Tubing Steel in CO2 Flooding

Corrosion Behavior of Ni-P-Nano-Al2o3 Composite Coating in the Presence of Anionic and Cationic Surfactants

Preparation of Chromium Carbide-Strengthened Ni-W Coatings by Electrodeposition and the Corresponding Anticorrosion Behavior in CO2-Saturated NaCl Solution

Insights into the effect of H2S on the corrosion behavior of N80 steel in supercritical CO2 environment

Unraveling the effect of H2S on the corrosion behavior of high strength sulfur-resistant steel in CO2/H2S/Cl− environments at ultra high temperature and high pressure

Enhancing Wear and Corrosion Resistance of Electroless Ni-P Coatings in CO 2 -saturated NaCl Solution through Polytetrafluoroethylene Incorporation

Corrosion behaviour of iron and nickel aluminide coatings under the synergistic effect of NaCl and water vapour

Effects of Adding CO2 to Low Level H2S Containing Aqueous Environments on the Corrosion and Hydrogen Penetration Behaviors of High-Strength Steel

The corrosion behavior of electroless Ni–P coatings in concentrated KOH electrolyte

CORROSION BEHAVIOR OF THE Ni-SiC NANOCOMPOSITE COATINGS

Study on corrosion behavior of P110S steel in CO2-H2S- saturated solution

Effect of H2S concentrations on corrosion failure of L245NS steel in CO2-O2-H2S system

Corrosion of Nickel in Acid Solutions with Hydrogen Sulphide

Research of CO_2 Corrosion Kinetics of Tubing and Casing Steel P110

Investigation on corrosion resistance of electroless Ni-W-P coatings co-deposited with SiO2 nanoparticles

Corrosion Resistance of Cu-Ni-Si Alloy Under High-Temperature, High-Pressure H2S and Cl− Environments

The Effect of Chloride Ion on Corrosion Behavior of Ni-P Alloy Coating Using SECM Experiment and COMSOL Simulation