Abstract:THIS STUDY investigates the stress, porosity, and composition of amorphous Ni-Mo-P electroless deposits obtained from typical acid (pH = 4.6) and alkaline (pH = 8.0) solutions, their effects on the corrosion performance of deposits in 5% NaCl, and the generation mechanism of stress and porosity. The results indicate that the deposit obtained at a certain pH and Na2MoO4 concentration has the best corrosion resistance in 5% NaCl. With the increase of Na2MoO4 concentration, the stress quickly changes from compressive to tensile, and the porosity increases. The higher the stress and porosity, the poorer is the corrosion resistance. When the Na2MoO4 concentration is about 0.05g/l, the deposit with the highest corrosion resistance, in neutral 5% NaCl, is easily obtained. The corrosion resistance in the long term was mainly governed by the stress of the deposits; the corrosion resistance in the short term was mainly governed by their porosity. When deposits have no porosity and at a low stress, amorphous Ni-Mo-P alloys with higher Mo contents have a better corrosion resistance; the phosphorous in the amorphous Ni-Mo-P films does not have an obvious influence on the corrosion resistance. Stresses were measured by X-ray analyser, and checked by appearance, after immersion in 5% HCl for 35 days. Corrosion performance was investigated by immersion corrosion tests, HNO3 corrosion blacking tests, porosity ferroxyl indicator tests, and the electrochemical corrosion technique.

The corrosion behavior of electroless Ni–P coatings in concentrated KOH electrolyte

Corrosion Characteristics of Electroless Ni–P Coating in Dichloropropanol (DCP) Solution

Stress And Corrosion Performance Of Amorphous Ni-Mo-P Electroless Deposits

Insights into the Electrochemical Corrosion Behavior and Mechanism of Electroless Ni-P Coating in the CO2/H2S/Cl− Environment

Electroless Deposition of Ni-Co-P Deposit on NdFeB Permanent Magnets and Its Corrosion Resistance Property

Optimization of the Electroplating Process for Amorphous Nickel- Phosphorus Alloy

Electrochemical Synthesis and Characterization of Ni–P Alloy Coatings from Eutectic–Based Ionic Liquid

Corrosion Resistance of Electroless Amorphous Ni-W-P Coating on 316L Stainless Steel

Electrodeposition and corrosion behaviour of nanocrystalline Fe–P coatings

Probing the stability of Ni2P nanoparticle electrocatalysts via operando benchtop X-ray absorption spectroscopy

Time-dependent corrosion behavior of electroless Ni–P coating in H2S/Cl− environment

Ni-P coatings electroplating - A review, Part I: Pure Ni-P alloy

Electrochemical Corrosion Behavior of Nickel-Coated Carbon Fiber Materials in Various Electrolytic Media

A review on the corrosion resistance of electroless Ni-P based composite coatings and electrochemical corrosion testing methods

Anti-corrosion Properties of Ni-P Alloy Deposits Prepared from Electrolytes Containing NaH2 PO2 · H2O

Corrosion Resistance of Electroless Amorphous Ni-W-P Coating on 316X Stainless Steel

Effect of Electrolyte pH on Microstructure, Corrosion Behavior, and Mechanical Behavior of Ni-P-W-TiO2 Electroplated Coatings

Characterization and corrosion behavior of electroless Ni-Mo-P/Ni-P composite coating in CO2/H2S/Cl− brine: Effects of Mo addition and heat treatment

High Corrosion-Resistant Ni–P/Ni/Ni–P Multilayer Coatings on Steel

Investigation of the Corrosion Behavior of Electroless Ni-P Coating in Flue Gas Condensate

Corrosion resistance of electrolessly deposited Ni–P and Ni–W–P alloys with various structures