Abstract:In the marine atmosphere, the corrosion rate of ship components is 4–5 times higher than that of the inland atmosphere. To solve the serious corrosion problem arising from long-term service in the marine environment of naval aircraft and ships, etc., this paper takes Al0.7FeCoCrNiCux system high-entropy alloy coating prepared by laser melting technology with 5083 aluminum alloys as the base material and analyzes the aging and failure mode of equipment coating under a marine atmospheric environment. XRD and SEM were utilized to study the microscopic morphological structure of the coatings. The laws of influence of Cu elements on the electrochemical corrosion behavior of the Al0.7FeCoCrNiCux system high-entropy alloy in 3.5 wt.% NaCl neutral solution was investigated by using dynamic potential polarization and electrochemical impedance spectroscopy, and neutral salt spray acceleration tests and outdoor atmospheric exposure tests were carried out. The results show that the Al0.7FeCoCrNiCux (x = 0) high-entropy alloy coating has a single BCC phase structure and the Al0.7FeCoCrNiCux (x = 0.30, 0.60, 0.80, 1.00) high-entropy alloy coating consists of both BCC and FCC phases with a typical dendrite morphology. With the increase in Cu content, the self-corrosion potential of Al0.7FeCoCrNiCux gradually increases and the current density gradually decreases, which with the results of the electrochemical impedance spectrum analysis, indicating that the corrosion resistance of Al0.7FeCoCrNiCu1.00 is optimal. The results of the neutral salt spray acceleration test and the outdoor atmospheric exposure test were integrated to conduct a comprehensive evaluation of the corrosion resistance of the coating. The corrosion resistance of Al0.7FeCoCrNiCux coating increases with the increase in Cu content, and the impressive strength and plastic deformation are best when x = 0.80. Neutral salt spray accelerated the test with no corrosion at 5040 h, and even if the coating is broken, it can last up to 4320 h. In the outdoor atmospheric exposure test, which was conducted 12 months after the coating surface test, no corrosion occurred.

Corrosion behaviour of iron and nickel aluminide coatings under the synergistic effect of NaCl and water vapour

Corrosion Behavior of Ni-P-Nano-Al2o3 Composite Coating in the Presence of Anionic and Cationic Surfactants

Salt spray corrosion behavior and electrochemical performance of Al and Ti reinforced Ni60 coating by laser cladding

Effect of deposition of Al/AlN coating on medium-Mn steel on its corrosion resistance in 5 wt.% NaCl

Erosion-corrosion behavior of Ni-Al-Cu coating on nickel-aluminium bronze alloy in 3.5 wt.% NaCl solution

The effect of Mn addition on corrosion behaviour of equiatomic CoCrFeNi high entropy alloys in NaCl solution

Hot Corrosion and Electrochemical Behavior of NiCrAlY, NiCoCrAlY and NiCoCrAlYTa Coatings in Molten NaCl-Na2SO4 at 800 °C

Corrosion Behavior of Al-containing CoNiV Alloys

Effects of solid NaCl and water vapour on hot corrosion behaviour of Inconel 718 superalloy and its aluminide coating

Relationship of Corrosion Behavior Between Single-Phase Equiatomic CoCrNi, CoCrNiFe, CoCrNiFeMn Alloys and Their Constituents in NaCl Solution

Corrosion Behavior of Ni/NiCr/NiCrAlSi Composite Coating on Copper for Application as a Heat Exchanger in Sea Water

Effect of Platinum and Pre-Oxidation on the Hot Corrosion Behavior of Aluminide Coating with NaCl at 1050 °C

Electrochemical Corrosion Behavior of CrFeCoNi and CrMnFeCoNi Coatings in Salt Solution

Corrosion behaviours of arc-sprayed AlSi-based amorphous/nanocrystalline coating

Influence of Al contents on the long-term corrosion behaviors of cold-sprayed Zn-xAl coatings

The influence of Ni on the microstructure and corrosion resistance of high-strength low alloy steel in the Cl-containing environment

Effect of Al Content on the Long-Term Corrosion Behavior of Arc-Sprayed ZnAl Alloy Coatings

Insights into the Electrochemical Corrosion Behavior and Mechanism of Electroless Ni-P Coating in the CO2/H2S/Cl− Environment

High performance aluminized Monel coatings with prolonged corrosion resistance in saline environment

Effect of Fluid parameters on Erosion-corrosion behavior of Al- 2%Zn coatings on AA5083 Aluminium Alloy in 3.5% NaCl

Study on the Corrosion Resistance of Laser Clad Al0.7FeCoCrNiCux High-Entropy Alloy Coating in Marine Environment