Abstract:Titanium alloys have high specific strength and excellent corrosion resistance and have been applied in deep-sea engineering fields. However, stress corrosion cracking may become one of the biggest threats to the service safety of a high-strength titanium alloy, as well as its weldment. In this work, stress corrosion cracking of a gas-tungsten-arc-welded Ti-6Al-3Nb-2Zr-1Mo (Ti6321) alloy influenced by the applied potentials in simulated deep-sea and shallow-sea environments was investigated by combining slow strain rate testing with electrochemical measurements. The results showed that the service environment and applied potential have a substantial effect on the stress corrosion cracking behavior of the Ti6321 welded joint. The Ti6321 welded joint exhibited higher stress corrosion susceptibility in a simulated deep-sea environment and at a strong polarization level owing to the diminishing protection of the passive film under passivation inhibition and the enhancement of the hydrogen effect. The fracture of a Ti6321 welded joint in the weld material could be attributed to the softening effect of the thick secondary α within the coarse-grained martensite. The electrochemical evaluation model of stress corrosion cracking susceptibility of a Ti6321 welded joint in a simulated marine environment was established by adding the criterion in the passivation region based on the literature model, and four potential regions corresponding to different stress corrosion cracking mechanisms were classified and discussed. Our study provides useful guidance for the deep-sea engineering applications of Ti6321 alloys and a rapid assessment method of stress corrosion risk.

Microscopic investigation on pitting corrosion of Ni-Cr-Mo-V high-strength steel weldment in simulated deep-sea environment

Electrochemical corrosion behavior of high strength steel in simulated deep-sea environment under different hydrostatic pressure

Pitting Behavior of Welded Joint and the Role of Carbon Ring in Improving Corrosion Resistance

Pitting corrosion of 2Cr13 stainless steel in deep-sea environment

Electrochemical Evaluation of Stress Corrosion Cracking Susceptibility of Ti-6Al-3Nb-2Zr-1Mo Alloy Welded Joint in Simulated Deep-Sea Environment

Research on Pitting Corrosion of Micro-alloyed High Strength Steel Bars

Corrosion and corrosive-wear behaviors of a high strength and toughness Cu-15Ni-8Sn alloy in seawater

Insight into the Corrosion Resistance Deterioration and Corrosion Film Transformation of Ti6321 Weldment in a Simulated Deep Sea Environment

Stress corrosion cracking behavior and mechanism of Fe-Mn-Al-C-Ni high specific strength steel in the marine atmospheric environment

Pit Evolution Around the Fusion Line of a NiCrMoV Steel Welded Joint Caused by Galvanic and Stress-Assisted Coupling Corrosion

Pitting corrosion model of mild and low-alloy steel in marine environment-Part 1: Maximum pit depth

Corrosion of high-strength steel in 3.5% NaCl solution under hydrostatic pressure: Initial corrosion with tensile stress coupling

Research on the Pitting Mechanism of Dispersion-Strengthened High-Strength Steel under Wet-Dry Cycling in a Marine Environment

Insight into the corrosion susceptibility and failure mechanism of Cu-Ni alloy pipeline welded joints in simulated marine environment

Pitting Corrosion and Stress Corrosion Cracking Around Heat Affected Zone in Welded Joint of CrNiMoV Rotor Steel in Chloridized High Temperature Water

Corrosion Behavior of High Strength Steel Welded Joint in Seawater: A Combinatorial Study Based on General and Localized Electrochemical Methods

Corrosion form transition of mooring chain steel in simulated deep-sea environments: remarkable roles of dissolved oxygen and hydrostatic pressure

The Influence of the Corrosion Product Layer Generated on the High Strength Low-Alloy Steels Welded by Underwater Wet Welding with Stainless Steel Electrodes in Seawater

Promotion of pitting corrosion at hydrogen-enriched α/γ phase boundaries in austenitic stainless steel weld joints

The effect of hydrogen on stress corrosion behavior of X65 steel welded joint in simulated deep sea environment

Comparative study of marine steel and welding joint in artificial seawater based on stress corrosion cracking and crack growth