Abstract:Charge accumulation on a solid insulator surface is one of the critical factors for the development of dc gas-insulated equipment since it will lead to the overstress of polymeric insulation due to local field distortion and enhancement. Therefore, it is significant to study the charge accumulation phenomenon on spacer surface under dc field. However, it remains an important subject to obtain the accurate results of surface charge distribution. Electrostatic probe method was used to measure the surface potential distribution of a cone-shaped spacer in a downsized gas-insulated line (GIL) and the inverse calculation method of the surface charge distribution, especially for this “shift-variant” configuration, was investigated. Numerical simulation was used to obtain the transfer matrix from charge density to the probe output. By a signal processing technique based on the Wiener filter, the ill-condition problem of the matrix was solved and the stability of the calculation was improved. The study also analyzed the spatial resolution and accuracy of the calculation results, which shows that the spatial resolution of the system can reach 1.8 mm. Based on the above method, we studied the charge accumulation phenomena of the epoxy spacer under dc voltage in air and SF6. The results show that there are two patterns in the charge distribution: “dominant uniform charging” and random “charge speckles”. The uniform charging was of the same polarity as the applied voltage, which indicates current flow from the solid bulk is the dominate mechanism in surface charging.

Measurement of Avalanche Size and Position Resolution of Rpcs with Different Surface Resistivities of the High Voltage Provider

Studies on RPC Position Resolution with Different Surface Resistivity of High Voltage Provider

Study On The Space Dispersion Of Induced Charge Of Resistive Plate Chamber

Study of an avalanche-mode resistive plate chamber

Study on the Position Resolution of Resistive Plate Chamber

Improving the RPC rate capability

Measurements of the Rate Capability of Various Resistive Plate Chambers

Numerical study of effects of electrode parameters and image charge on the electric field configuration of RPCs

Numerical study of space charge electric field inside Resistive Plate Chamber

Study on the Physical Mechanism in Multi-Gap Resistive Plate Chamber

Study on the Performance of Large Area Mrpc with High Position Resolution

A Sub-Millimeter Spatial Resolution Achieved by a Large Sized Glass RPC

Effect of the Integrated Time of the Induced Current Signal on the Position Resolution of the RPC Detector

Study of Spatial Resolution Properties of a Glass RPC

Charge Distribution Dependency on Gap Thickness of CMS Endcap RPC

Study on the Performance of the YBJ-ARGO RPC

Linearity and rate capability measurements of RPC with semi-insulating crystalline electrodes operating in avalanche mode

Measurement of electrical properties of electrode materials for the bakelite Resistive Plate Chambers

A new layout about the graphite layers in RPC

Research On Cosmic Ray Mass Test Method Of Mrpc

Measurement Method and Accumulation Characteristics of Surface Charge Distribution on Polymeric Material under DC Voltage