Abstract:In order to develop a high spatial resolution (micron level) thermal neutron detector, a detector assembly composed of cerium doped lithium glass microfibers, each with a diameter of 1 μm, is proposed, where the neutron absorption location is reconstructed from the observed charged particle products that result from neutron absorption. To suppress the cross talk of the scintillation light, each scintillating fiber is surrounded by air-filled glass capillaries with the same diameter as the fiber. This pattern is repeated to form a bulk microfiber detector. On one end, the surface of the detector is painted with a thin optical reflector to increase the light collection efficiency at the other end. Then the scintillation light emitted by any neutron interaction is transmitted to one end, magnified, and recorded by an intensified CCD camera. A simulation based on the Geant4 toolkit was developed to model this detector. All the relevant physics processes including neutron interaction, scintillation, and optical boundary behaviors are simulated. This simulation was first validated through measurements of neutron response from lithium glass cylinders. With good expected light collection, an algorithm based upon the features inherent to alpha and triton particle tracks is proposed to reconstruct the neutron reaction position in the glass fiber array. Given a 1 μm fiber diameter and 0.1mm detector thickness, the neutron spatial resolution is expected to reach σ∼1 μm with a Gaussian fit in each lateral dimension. The detection efficiency was estimated to be 3.7% for a glass fiber assembly with thickness of 0.1mm. When the detector thickness increases from 0.1mm to 1mm, the position resolution is not expected to vary much, while the detection efficiency is expected to increase by about a factor of ten.

Study of Spatial Resolution Properties of a Glass RPC

A Sub-Millimeter Spatial Resolution Achieved by a Large Sized Glass RPC

Study on the Position Resolution of Resistive Plate Chamber

Measurement of Avalanche Size and Position Resolution of Rpcs with Different Surface Resistivities of the High Voltage Provider

A high rate and high timing photoelectric detector prototype with RPC structure

The Development and Study of High-Position Resolution (50 micron) RPCs for Imaging X-rays and UV photons

Monte Carlo simulation of a very high resolution thermal neutron detector composed of glass scintillator microfibers

Performance study of large-area glass resistive plate chambers with different spacer configurations

High Rate, Fast Timing Glass RPC for the High Η CMS Muon Detectors

Study of an avalanche-mode resistive plate chamber

Study on the Performance of Large Area Mrpc with High Position Resolution

Studies on RPC Position Resolution with Different Surface Resistivity of High Voltage Provider

Improving the RPC rate capability

A Cosmic Ray Test Platform Based on High Time Resolution MRPC Technology

Effect of the Integrated Time of the Induced Current Signal on the Position Resolution of the RPC Detector

A Thin Float Glass Mrpc for the Outer Region of Cbm-Tof Wall

Study on the Γ Ray and Neutron Sensitivity of MRPC

A Position Resolution Mrpc for Muon Tomography

Performance Study of a Real-Size Mosaic High-Rate MRPC

Optimisation and Characterisation of Glass RPC for India-based Neutrino Observatory Detectors

A Practical Method to Determine the Spatial Resolution of Gem Detector