Abstract:In the CBM (Compressed Baryonic Matter) experiment constructed at the Facility for Anti-proton and Ion Research (Fair) at GSI, Darmstadt, Germany, MRPC(Multi-gap Resistive Plate Chamber) is adopted to construct the large TOF (Time-of-Flight) system to achieve an unprecedented precision of hadron identification, benefiting from its good time resolution, relatively high efficiency and low building price. We have developed a kind of double-ended readout strip MRPC. It uses low resistive glass to keep good performance of time resolution under high-rate condition. The differential double stack structure of 2x4 gas gaps help to reduce the required high voltage to half. There are 24 strips on one counter, and each is 270mm long, 7mm wide and the interval is 3mm. Ground is placed onto the MRPC electrode and feed through is carefully designed to match the 100 Ohm impedance of PADI electronics. The prototype of this strip MRPC has been tested with cosmic ray, a 98% efficiency and 60ps time resolution is gotten. In order to further examine the performance of the detector working under higher particle flux rate, the prototype has been tested in the 2014 October GSI beam time and 2015 February CERN beam time. In both beam times a relatively high rate of 1 kHz/cm2 was obtained. The calibration is done with CBM ROOT. A couple of corrections has been considered in the calibration and analysis process (including time-walk correction, gain correction, strip alignment correction and velocity correction) to access actual counter performances such as efficiency and time resolution. An efficiency of 97% and time resolution of 48ps are obtained. All these results show that the real-size prototype is fully capable of the requirement of the CBM-TOF, and new designs such as self-sealing are modified into the strip counter prototype to obtain even better performance.

A Cosmic Ray Test Platform Based on High Time Resolution MRPC Technology

High Position Resolution MRPC Developed for Muon Tomography

Study on the Performance of Large Area Mrpc with High Position Resolution

Development and test of a real-size MRPC for CBM-TOF

Research On Cosmic Ray Mass Test Method Of Mrpc

Research on Cosmic Ray Test Technology of MRPC

Study of High Time Resolution MRPC with the Waveform Digitizer System

Development of a Sealed MRPC with High Time Resolution

Study on the Performance of Multi-Gap Resistive Plate Chambers

Performance Testing of a Long-Strip Two-End Readout Multi-Gap Resistive Plate Chamber

Multigap Resistive Plate Chambers for Time of Flight Applications

A very thin MRPC developed for TOF-PET

A Position Resolution Mrpc for Muon Tomography

Development of Multi-gap Resistive Plate Chamber (MRPC) for medical imaging

The Research and Development of a Prototype Cosmic Ray Muon Tomography Facility with Large Area MRPC Detectors

Study on the Position Resolution of Resistive Plate Chamber

A Prototype of a High Rating MRPC

A New Design of MRPC to Reduce Noise and Crosstalk

A Large Area MRPC Designed for Muon Tomography

Design and Test of a Gluing High Rate MRPC

Development of High-Rate Mrpcs for High Resolution Time-Of-Flight Systems