Abstract:Radiation detectors based on Cadmium Zinc Telluride (CZT) compounds are becoming popular solutions thanks to their high detection efficiency, room temperature operation, and to their reliability in compact detection systems for medical, astrophysical, or industrial applications. However, despite a huge effort to improve the technological process, CZT detectors' full potential has not been completely exploited when both high spatial and energy resolution are required by the application, especially at low energies (<10 keV), limiting their application in energy-resolved photon counting (ERPC) systems. This gap can also be attributed to the lack of dedicated front-end electronics which can bring out the best in terms of detector spectroscopic performances. In this work, we present the latest results achieved in terms of energy resolution using SIRIO, a fast low-noise charge sensitive amplifier, and a linear-array pixel detector, based on boron oxide encapsulated vertical Bridgman-grown B-VB CZT crystals. The detector features a 0.25-mm pitch, a 1-mm thickness and is operated at a −700-V bias voltage. An equivalent noise charge of 39.2 el. r.m.s. (corresponding to 412 eV FWHM) was measured on the test pulser at 32 ns peaking time, leading to a raw resolution of 1.3% (782 eV FWHM) on the 59 keV line at room temperature (+20 °C) using an uncollimated 241Am, largely improving the current state of the art for CZT-based detection systems at such short peaking times, and achieving an optimum resolution of 0.97% (576 eV FWHM) at 1 μs peaking time. The measured energy resolution at the 122 keV line and with 1 μs peaking time of a 57Co raw uncollimated spectrum is 0.96% (1.17 keV). These activities are in the framework of an Italian collaboration on the development of energy-resolved X-ray scanners for material recycling, medical applications, and non-destructive testing in the food industry.

The Development and Study of High-Position Resolution (50 micron) RPCs for Imaging X-rays and UV photons

Study on the Position Resolution of Resistive Plate Chamber

Study on the Performance of Large Area Mrpc with High Position Resolution

A Sub-Millimeter Spatial Resolution Achieved by a Large Sized Glass RPC

New Readout Scheme for Large Area Timing & Position RPCs

A High Position Resolution X-ray Detector: an Edge on Illuminated Capillary Plate Combined with a Gas Amplification Structure

X-ray speed reading with the MCRC: prototype success and next generation upgrades

A High Count-Rate and Depth-of-Interaction Resolving Single Layered One-Side Readout Pixelated Scintillator Crystal Array for PET Applications

Improving the RPC rate capability

Development of a new Front End electronics in Silicon and Silicon-Germanium technology for the Resistive Plate Chamber detector for high rate experiments

Prototype study of $0.1\%\,X_0$ and $\mathrm{MHz/cm^2}$ tolerant Resistive Plate Chamber with Diamond-Like Carbon electrodes

Development of High-Rate Mrpcs for High Resolution Time-Of-Flight Systems

Development of Hybrid Resistive Plate Chambers

X-ray Single-Pixel Imaging with MPGD-based detectors

Advances in High-Energy-Resolution CdZnTe Linear Array Pixel Detectors with Fast and Low Noise Readout Electronics

Small-area Portable Resistive Plate Chambers for Muography

Progress in Developing Hybrid RPCs: GEM-like Detectors with Resistive Electrodes

High Rate, Fast Timing Glass RPC for the High Η CMS Muon Detectors

Study of Spatial Resolution Properties of a Glass RPC

Development towards high-resolution kHz-speed rotation-free volumetric imaging