Abstract:We have systematically studied the transmission of electrical signals along several 2-strip Resistive Plate Chambers (RPCs) in the frequency range $f=0.1-3.5$GHz. Such a range was chosen to fully cover the bandwidth associated to the very short rise-times of signals originated in RPCs used for sub-100ps timing applications. This work conveys experimental evidence of the dominant role of modal dispersion in counters built at the 1 meter scale, a fact that results in large cross-talk levels and strong signal shaping. It is shown that modal dispersion appears in RPCs due to the intrinsic unbalance between the capacitive and the inductive coupling $C_m/C_o \neq L_m/L_o$. A practical way to restore this symmetry has been introduced (hereafter `electrostatic compensation'), allowing for a cross-talk suppression factor of around $\times 12$ and a rise-time reduction by 200ps. Under conditions of compensation the signal transmission is only limited by dielectric losses, yielding a length-dependent cutoff frequency of around 1GHz per 2 meter for typical float glass -based RPCs ($\tan \delta|_{glass} = 0.025\pm0.005$). It is further shown that `electrostatic compensation' can be achieved for an arbitrary number of strips as long as the nature of the coupling is `short-range', that is an almost exact assumption for typical strip-line RPCs. Evidence for deviations from the dominant TEM propagation mode has been observed, although they seem to have negligible influence in practical signal observables. This work extends the bandwidth of previous studies by a factor of almost $\times 20$.

Study On The Space Dispersion Of Induced Charge Of Resistive Plate Chamber

Effect of the Integrated Time of the Induced Current Signal on the Position Resolution of the RPC Detector

Measurement of Avalanche Size and Position Resolution of Rpcs with Different Surface Resistivities of the High Voltage Provider

Study on the Position Resolution of Resistive Plate Chamber

Studies on RPC Position Resolution with Different Surface Resistivity of High Voltage Provider

A Detailed Study on the Intrinsic Time Resolution of the Future MRPC Detector

Study on the Physical Mechanism in Multi-Gap Resistive Plate Chamber

Study on the Performance of Large Area Mrpc with High Position Resolution

Study of an avalanche-mode resistive plate chamber

Numerical study of effects of electrode parameters and image charge on the electric field configuration of RPCs

Prototype study of $0.1\%\,X_0$ and $\mathrm{MHz/cm^2}$ tolerant Resistive Plate Chamber with Diamond-Like Carbon electrodes

Study of High Time Resolution MRPC with the Waveform Digitizer System

Multigap Resistive Plate Chambers for Time of Flight Applications

A new layout about the graphite layers in RPC

Signal coupling and signal integrity in multi-strip Resistive Plate Chambers used for timing applications

A Front-End Electronics Module for Multi-gap Resistive Plate Chambers

Measurements of the Rate Capability of Various Resistive Plate Chambers

Study on the Performance of High Rating Mrpc

Improving the RPC rate capability

Study of Spatial Resolution Properties of a Glass RPC

Study of A Multi-Wire Proportional Chamber with A Cathode Strip and Delay-Line Readout