Abstract:In high energy physics experiments, the MRPC (Multi-Gap Resistive Plate Chamber) detectors are widely used recently which can provide higher-resolution measurement for particle identification. However, the application of MRPC detectors leads to a series of challenges in electronics design with large number of front-end electronic channels, especially for distributing clock precisely. To deal with these challenges, this paper presents a universal scheme of clock transmission network for MRPC-based experiments with advantages of both precise clock distribution and global command synchronization. For precise clock distributing, the clock network is designed into a tree architecture with two stages: the first one has a point-to-multipoint long range bidirectional distribution with optical channels and the second one has a fan-out structure with copper link inside readout crates. To guarantee the precision of clock frequency or phase, the r-PTP (reduced Precision Time Protocol) and the DDMTD (digital Dual Mixer Time Difference) methods are used for frequency synthesis, phase measurement and adjustment, which is implemented by FPGA (Field Programmable Gate Array) in real-time. In addition, to synchronize global command execution, based upon this clock distribution network, synchronous signals are coded with clock for transmission. With technique of encoding/decoding and clock data recovery, signals such as global triggers or system control commands, can be distributed to all front-end channels synchronously, which greatly simplifies the system design. The experimental results show that both the clock jitter (RMS) and the clock skew can be less than 100 ps.

Signal coupling and signal integrity in multi-strip Resistive Plate Chambers used for timing applications

Frequency-domain formulation of signal propagation in multistrip Resistive Plate Chambers and its low-loss, weak-coupling analytical approximation

Crosstalk Research of Long Strip Timing RPC

Development of High-Rate Mrpcs for High Resolution Time-Of-Flight Systems

Study On The Space Dispersion Of Induced Charge Of Resistive Plate Chamber

Study of timing properties of single gap high-resistive bakelite RPC

Study of Transmission-Line Impedance of Strip Lines in an MRPC Detector

Prototype study of $0.1\%\,X_0$ and $\mathrm{MHz/cm^2}$ tolerant Resistive Plate Chamber with Diamond-Like Carbon electrodes

Performance Testing of a Long-Strip Two-End Readout Multi-Gap Resistive Plate Chamber

Simulation and Measurement of the Impedance of Transmission Lines in MRPC Detector

Performance study of large-area glass resistive plate chambers with different spacer configurations

A Precise Clock Distribution Network for MRPC-based Experiments

Development of Multi-Gap Resistive Plate Chambers with Low-Resistive Silicate Glass Electrodes for Operation at High Particle Fluxes and Large Transported Charges

High-resolution Microwave Frequency Dissemination Via 56 Km Optical Fiber Based on Microwave Phase Compensation

A Low Level Radio Frequency System Drift Compensation Technique by Time-Multiplexing Pick-Up/reference Signals

Measurement of electrical properties of electrode materials for the bakelite Resistive Plate Chambers

Dispersion Compensation for PLCI Based on Fringe Peak Estimation and Polynomial Fitting

Stable Radio Frequency Dissemination in a Multi-Access Link Based on Passive Phase Fluctuation Cancellation

A Front-End Electronics Module for Multi-gap Resistive Plate Chambers

Chromatic Dispersion Compensation in Phase-Stabilized Dissemination System of Broadband Signals Based on Phase Conjugation

Development of Hybrid Resistive Plate Chambers