Abstract:We have systematically studied the transmission of electrical signals along several 2-strip Resistive Plate Chambers (RPCs) in the frequency range $f=0.1-3.5$GHz. Such a range was chosen to fully cover the bandwidth associated to the very short rise-times of signals originated in RPCs used for sub-100ps timing applications. This work conveys experimental evidence of the dominant role of modal dispersion in counters built at the 1 meter scale, a fact that results in large cross-talk levels and strong signal shaping. It is shown that modal dispersion appears in RPCs due to the intrinsic unbalance between the capacitive and the inductive coupling $C_m/C_o \neq L_m/L_o$. A practical way to restore this symmetry has been introduced (hereafter `electrostatic compensation'), allowing for a cross-talk suppression factor of around $\times 12$ and a rise-time reduction by 200ps. Under conditions of compensation the signal transmission is only limited by dielectric losses, yielding a length-dependent cutoff frequency of around 1GHz per 2 meter for typical float glass -based RPCs ($\tan \delta|_{glass} = 0.025\pm0.005$). It is further shown that `electrostatic compensation' can be achieved for an arbitrary number of strips as long as the nature of the coupling is `short-range', that is an almost exact assumption for typical strip-line RPCs. Evidence for deviations from the dominant TEM propagation mode has been observed, although they seem to have negligible influence in practical signal observables. This work extends the bandwidth of previous studies by a factor of almost $\times 20$.

Study of timing properties of single gap high-resistive bakelite RPC

Measurement of electrical properties of electrode materials for the bakelite Resistive Plate Chambers

Performances of silicone coated high resistive bakelite RPC

Performance study of a bakelite RPC prototype built by new technique of linseed oil coating

Development of linseed oil-free bakelite resistive plate chambers

Development of bakelite based Resistive Plate Chambers

A new type of RPC with very low resistive material

A new technique of linseed oil coating in bakelite RPC and the first test results

Bakelite RPCs for Digital Hadron Calorimeter

Fabrication and characterisation of oil-free large High Pressure Laminate Resistive Plate Chamber

Development of Multi-gap Resistive Plate Chamber (MRPC) for medical imaging

Linearity and rate capability measurements of RPC with semi-insulating crystalline electrodes operating in avalanche mode

Study of RPC bakelite electrodes and detector performance for INO-ICAL

Study on the Position Resolution of Resistive Plate Chamber

Development of a Sealed MRPC with High Time Resolution

Study on the Performance of High Rating Mrpc

Beam Test Results of Two Kinds of High-Rate Multi-Gap Resistive Plate Chambers

Measurements of the Rate Capability of Various Resistive Plate Chambers

Prototype study of $0.1\%\,X_0$ and $\mathrm{MHz/cm^2}$ tolerant Resistive Plate Chamber with Diamond-Like Carbon electrodes

Signal coupling and signal integrity in multi-strip Resistive Plate Chambers used for timing applications

Intrinsic Linearity of Bakelite Resistive Plate Chambers Operated in Streamer Mode