Abstract:This paper presents an investigation on DC flashover voltage of silicone rubber (SiR) improved by dielectric barrier discharge (DBD) plasma treatments under ambient atmospheric pressure air. DC surface conductivity, surface potential decay (SPD), DC surface flashover voltage, partial discharge magnitude, Fourier transform infrared (FT-IR) spectrograms, and surface water contact angles are measured to analyze the influence of plasma treatment on the SiR. It is found that the speed of SPD increase consistently with the plasma modification time. The tendency of flashover voltage is increasing at first and then decreasing with the increased time of the plasma treatment. The magnitude and number of partial discharge pulses increase apparently with the increased plasma treatment time. Physicochemical measurements indicate that more amount of polar groups appear on surface after the DBD plasma modification, whereas the surface water contact angles decline continuously with the increased plasma modification time. However, the hydrophobicity is recovered after 30 d exposure in the air. It is demonstrated that the SPD is accelerated significantly due to the increased surface conductivities and density of shallow traps. However, the reduction of flashover voltage after longer time of the plasma treatment is attributed to the increased mobility of charge carriers on the sample surface.

Performances of silicone coated high resistive bakelite RPC

Measurement of electrical properties of electrode materials for the bakelite Resistive Plate Chambers

Development of linseed oil-free bakelite resistive plate chambers

Study of timing properties of single gap high-resistive bakelite RPC

Performance study of a bakelite RPC prototype built by new technique of linseed oil coating

Development of bakelite based Resistive Plate Chambers

A new technique of linseed oil coating in bakelite RPC and the first test results

Fabrication and characterisation of oil-free large High Pressure Laminate Resistive Plate Chamber

Study of RPC bakelite electrodes and detector performance for INO-ICAL

Bakelite RPCs for Digital Hadron Calorimeter

Numerical study of effects of electrode parameters and image charge on the electric field configuration of RPCs

Prototype study of $0.1\%\,X_0$ and $\mathrm{MHz/cm^2}$ tolerant Resistive Plate Chamber with Diamond-Like Carbon electrodes

Intrinsic Linearity of Bakelite Resistive Plate Chambers Operated in Streamer Mode

Studies on RPC Position Resolution with Different Surface Resistivity of High Voltage Provider

Development of Hybrid Resistive Plate Chambers

Linearity and rate capability measurements of RPC with semi-insulating crystalline electrodes operating in avalanche mode

Surface Potential Decay and DC Surface Flashover Characteristics of DBD Plasma-Treated Silicone Rubber

Performance of Two Different Modules of Long-Strip Multi-Gap Resistive Plate Chamber

Study on the Performance of High Rating Mrpc

Development of Multi-gap Resistive Plate Chamber (MRPC) for medical imaging

Aging Study of RPC's for the SiD Hcal and Muon System