Abstract:The proposed magnetised Iron CALorimeter detector (ICAL) to be built in the India-based Neutrino Observatory (INO) laboratory aims to detect atmospheric muon neutrinos. In order to achieve improved physics results, the constituent components of the detector must be fully understood by proper characterisation and optimisation of various parameters. Resistive Plate Chambers (RPCs) are the active detector elements in the ICAL detector and can be made of glass or bakelite. The number of RPCs required for this detector are very large so a detailed study is necessary to establish the characterisation and optimisation of these RPCs. These detectors once installed will be taking data for 15-20 years. In this paper, we report the selection criteria of the glass electrodes procured from Indian manufacturers. Based on the factors that deteriorate the quality of glass the choice of electrode is made. The glass characterisation studies include UV-VIS transmission for optical properties, SEM, AFM for surface properties, WD-XRF, PIXE for determining the composition of glass samples and electrical properties. Based on these techniques a procedure is adopted to arrive at the best glass sample. We have done a second order check on the quality of the fabricated glass RPCs. In this regard, the efficiency and cross-talk of RPCs were measured. Results from Asahi and Saint Gobain glass RPCs came out to be the best.

Development of linseed oil-free bakelite resistive plate chambers

Development of bakelite based Resistive Plate Chambers

Performance study of a bakelite RPC prototype built by new technique of linseed oil coating

Performances of silicone coated high resistive bakelite RPC

Measurement of electrical properties of electrode materials for the bakelite Resistive Plate Chambers

A new technique of linseed oil coating in bakelite RPC and the first test results

Fabrication and characterisation of oil-free large High Pressure Laminate Resistive Plate Chamber

Study of timing properties of single gap high-resistive bakelite RPC

Study of RPC bakelite electrodes and detector performance for INO-ICAL

Development of Hybrid Resistive Plate Chambers

Intrinsic Linearity of Bakelite Resistive Plate Chambers Operated in Streamer Mode

Bakelite RPCs for Digital Hadron Calorimeter

Prototype study of $0.1\%\,X_0$ and $\mathrm{MHz/cm^2}$ tolerant Resistive Plate Chamber with Diamond-Like Carbon electrodes

Development of Multi-gap Resistive Plate Chamber (MRPC) for medical imaging

Measurement of Characteristic Impedance of Silicon Fiber Sheet based readout strips panel for RPC detector in INO

Leak Test of Resistive Plate Chamber Gap by Monitoring Absolute Pressure

Optimisation and Characterisation of Glass RPC for India-based Neutrino Observatory Detectors

Study of an avalanche-mode resistive plate chamber

Stability studies of sealed Resistive Plate Chambers

Development of Glass Resistive Plate Chambers for INO

Linearity and rate capability measurements of RPC with semi-insulating crystalline electrodes operating in avalanche mode