Abstract:Single gap Resistive Plate Chamber (RPC) is one of the very popular gaseous detectors used in high-energy physics experiments nowadays. It is a very fast detector having low cost of fabrication. The RPCs are usually built using glass or bakelite plates having high resistivity ∼ 1 0 10 – 1 0 11 Ω cm. Bakelite RPCs are generally fabricated with a linseed oil coating inside to make the inner electrode surface smoother which helps to reduce the micro discharge probability. Linseed oil coating also reduces the surface UV sensitivity dramatically and effectively protect the bakelite surfaces from the Hydrofluoric Acid (HF), produced by the interaction of fluorine with the water vapour. There is a conventional way to do this linseed oil coating after making the gas gap as done in experiments e . g . ALICE, CMS etc. A new technique is introduced here to do the linseed oil coating on the bakelite plate before making the gas gap. 100% Tetrafluoroethane (C 2 H 2 F 4 ) gas is used to test the RPC module in the avalanche mode with cosmic rays. Conventional NIM electronics is used for this study. The efficiency and noise rate are measured. In this article, the detailed method of fabrication and the first test results are presented.

A new layout about the graphite layers in RPC

Study of an avalanche-mode resistive plate chamber

Prototype study of $0.1\%\,X_0$ and $\mathrm{MHz/cm^2}$ tolerant Resistive Plate Chamber with Diamond-Like Carbon electrodes

An underground cosmic-ray detector made of RPC

Improving the RPC rate capability

Study on the Position Resolution of Resistive Plate Chamber

New Readout Scheme for Large Area Timing & Position RPCs

Advances towards a large-area, ultra-low-gas-consumption RPC detector

Development of Hybrid Resistive Plate Chambers

Wide-Gap Resistive Plate Chamber for the Trigger System of the TOF MPD Test Bench

Challenges for RPCs and resistive micropattern detectors in the next few years

Measurement of Avalanche Size and Position Resolution of Rpcs with Different Surface Resistivities of the High Voltage Provider

Multigap Resistive Plate Chambers for Time of Flight Applications

A new technique of linseed oil coating in bakelite RPC and the first test results

Eco-friendly Resistive Plate Chambers for detectors in future HEP applications

Progress in Developing Hybrid RPCs: GEM-like Detectors with Resistive Electrodes

Numerical study of effects of electrode parameters and image charge on the electric field configuration of RPCs

Performance study of a bakelite RPC prototype built by new technique of linseed oil coating

Performance of thin-RPC detectors for high rate applications with eco-friendly gas mixtures

Study on the Physical Mechanism in Multi-Gap Resistive Plate Chamber

Bakelite RPCs for Digital Hadron Calorimeter