Abstract:Charge accumulation usually happens on the surface of spacers under DC operation, which is susceptible to inducing surface flashover. In order to explore the surface charge accumulation mechanisms and the influences of dielectric conductivity, gas ion mobility, and temperature field on the surface charges, a time-varying charge density model at the gas–solid interface of spacers was established. The results of the simulation show that the discontinuity of the current density between the spacer bulk side and the gas ion flow is the fundamental reason for the charge accumulation on the spacer surface. Additionally, the value of current density fluxes at the interface continues to decrease with the change of the electric field, and the progress of charge transfer gradually stabilizes. Moreover, the dielectric conductivity directly affects the charge accumulation process, and there is a critical conductivity in which the effect of charge conduction in dielectrics counteracts that of gas-phase charge deposition, theoretically. When the conductivity is higher than the critical conductivity, the solid-side charge conduction is the main source of the surface charge accumulation, while the gas-phase charge deposition on the gas side plays a dominant role when the conductivity is lower than the critical conductivity. The charge accumulation is not significantly affected by gas ion mobility when the temperature is evenly distributed. However, under the temperature field with gradient distribution, the current density fluxes at the interface change, causing the polarity reverse of the accumulated charge. In the high-temperature region, the volume current density surges simultaneously with the conductivity, leading to a higher density of surface charge accumulation. Lastly, the design of spacers needs to keep the current densities on both sides of the interface as similar as possible in order to avoid excessive charge gathering in localized areas.

Measurement Method and Accumulation Characteristics of Surface Charge Distribution on Polymeric Material under DC Voltage

Charge Accumulation Patterns on Spacer Surface in HVDC Gas-Insulated System: Dominant Uniform Charging and Random Charge Speckles

Accumulation Characteristics of Surface Charge on a Cone-type Model Insulator under DC Voltage

Surface Charge Accumulation Phenomenon at the Gas-solid Interface Under DC Voltage

Review of Charge Accumulation on Spacers of Gas Insulated Equipment at DC Stress

Characteristics and Mechanisms of Surface Charge Accumulation on A Cone-Type Insulator under Dc Voltage

Characteristics of Surface Charge Accumulation on Spacers and Its Influencing Factors

Measurements and Calculations of Surface Charge on the Cone-Type Insulator

Field-dependent Charging Phenomenon of HVDC Spacers Based on Dominant Charge Behaviors

Surface Charge Accumulation Characteristics of Cone-shape Insulator Under DC/AC

Surface Charging Characteristics of GIL Model Spacers under DC Stress in C4F7N/CO2 Gas Mixture

Charge accumulation characteristic on polymer insulator surface under AC voltage in air and C 4 F 7 N/CO 2 mixtures

Thermal Gradient Effects on Surface Charge of HVDC Spacer in Gas Insulated System

Charge interaction behaviors at interfacial domains in DC GIL insulators

Metal Particle Induced Spacer Surface Charging Phenomena in Direct Current Gas-Insulated Transmission Lines

A Simplified Method to Estimate Surface Trap Distribution: Potential Decay by Charge Dissipation Along Surface

Effect of insulation distance on surface charge accumulation at the gas-solid interface under DC voltage

Surface Charging Phenomena on HVDC Spacers for Compressed SF 6 Insulation and Charge Tailoring Strategies

Review of Surface Charge Accumulation on Insulators in DC Gas-Insulated Power Transmission Lines: Measurement and Suppression Measures

Review and Prospect of Surface ChargeInversion Algorithm of Cone-Type Spacer Based on Surface Potential Measurements

Gas–solid Interface Charge Characterisation Techniques for HVDC GIS/GIL Insulators