Abstract:Charge accumulation on a solid insulator surface is one of the critical factors for the development of dc gas-insulated equipment since it will lead to the overstress of polymeric insulation due to local field distortion and enhancement. Therefore, it is important to study the charge accumulation phenomenon on spacer surface under dc field. For decades, researchers have made tremendous progress on this subject by measurement and simulation. However, measurement results are quite different by different researchers due to various electrode configurations and experimental conditions. Further, most researchers use potential to represent charge density, which is not rigorous in that many charge density distribution details are hidden behind the potential. As for pure numerical simulation, reports are rather academic and sometimes cannot accord with the real fact. In this paper, attempts are made to characterize the charge accumulation patterns on spacer surface in HVDC gas-insulated system. Surface charge distributions on a model GIL spacer in 0.1 MPa air under DC voltage are obtained by an advanced measurement method, from which the dominant uniform charging pattern and random charge speckles are separated. Mechanism responsible for the dominant uniform charging pattern is discussed with the aid of a simulation model. Results indicate that, in a well-cleaned system, the electric current through the spacer bulk is the principal factor, but gas conduction is not negligible due to some inevitable ion sources. Highly localized pockets of charge are also observed, which are referred to as speckles. They may originate from micro discharges due to tiny metal particles on the spacer surface or microscopic protrusions on the electrodes.

Characteristics and Mechanisms of Surface Charge Accumulation on A Cone-Type Insulator under Dc Voltage

Accumulation Characteristics of Surface Charge on a Cone-type Model Insulator under DC Voltage

Surface Charge Accumulation Phenomenon at the Gas-solid Interface Under DC Voltage

Surface Charge Accumulation Characteristics of Cone-shape Insulator Under DC/AC

Measurements and Calculations of Surface Charge on the Cone-Type Insulator

Measurement Method and Accumulation Characteristics of Surface Charge Distribution on Polymeric Material under DC Voltage

Dynamic Observation of Dc Surface Charge Dissipation for Epoxy-Resin/alumina Composite

Surface charging physics of the basin insulator in ±320 kV gas-insulated transmission lines

Review of Surface Charge Accumulation on Insulators in DC Gas-Insulated Power Transmission Lines: Measurement and Suppression Measures

The Accumulation Characteristic for Surface Charge on the GIL three-pillar insulator under AC Voltage

Charge accumulation characteristic on polymer insulator surface under AC voltage in air and C 4 F 7 N/CO 2 mixtures

Charge interaction behaviors at interfacial domains in DC GIL insulators

Charge Accumulation Patterns on Spacer Surface in HVDC Gas-Insulated System: Dominant Uniform Charging and Random Charge Speckles

Impact of Pressure and Temperature on Charge Accumulation Characteristics of Insulators in Direct-Current Gas-Insulated Switchgear

Surface Charge Accumulation and Pre-Flashover Characteristics Induced by Metal Particles on the Insulator Surfaces of 1100 Kv GILs under AC Voltage

Mechanisms of charge-induced surface discharge under positive impulse voltages

Review of Charge Accumulation on Spacers of Gas Insulated Equipment at DC Stress

Surface Charge Characteristics of DC-GIL Insulator Under Multiphysics Coupled Field: Effects of Ambient Temperature, Load Current, and Gas Pressure

Measurements of Electric Field and Charge on Insulator Surface

Analysis of Surface Charge Decay Process on Insulators in SF6 and Air

Insight into Charge-Induced Flashover at the Gas–solid Interface in DC Gas-Insulated Systems