Abstract:Surface discharge induced by metal particles is a common insulation failure in many high-voltage equipment. In order to further understand the mechanisms of this surface discharge, a 2D simulation model of a plate-surface-plate structure with a pin is established and verified by experiments in this paper to simulate the actual discharge configurations, and the evolution characteristics of the positive and negative surface discharges are compared. The evolutions of both positive and negative discharges could be divided into two phases: the bridging phase and the expansion phase. As the electric field in the gap between the streamer and the dielectric surface is strengthened by the effect of the space charge, the ionization sources and the secondary electrons excited on the dielectric surface, the dielectric surface presents attraction to the streamer, and subsequently the two streamer routes first touch the dielectric surface and then arrive at the grounding electrode. However, the channel branching is the most distinctive characteristic of the positive and negative discharges. In the positive discharge, the channel first branches, then merges, and finally expands, and the gaps of pin to dielectric surface and pin to grounding electrode are broken down by two slender positive branches, respectively. The negative discharge presents a stout channel without branching, which develops and expands simultaneously. This is ascribed to the thinner space charge layer, the weaker shielding effect of the internal electric field and the more active movement of the internal charges in the positive discharge. Another important factor for the discharge branching is the appropriate matching of the sheath thickness and the curvature radius of the channel's head.

Mechanisms of charge-induced surface discharge under positive impulse voltages

Mechanism of Positive Streamer Discharge under Intense Vertical Component Electric Field

Insight into Charge-Induced Flashover at the Gas–solid Interface in DC Gas-Insulated Systems

Surface Charging Phenomena on HVDC Spacers for Compressed SF 6 Insulation and Charge Tailoring Strategies

Simulation comparison of the positive and negative surface discharges induced by metal particles in a plate-surface-plate structure under DC excitation in atmospheric air

Influence of AC and DC Composite Voltage on Positive Streamer Discharge

Luminescence Reveals Micro Discharge As a Potential Triggering Factor for Surface Flashover

Discharge Characteristics and Numerical Simulation of the Oil–Gas Surface under DC Voltage

Charge Cluster Triggers Unpredictable Insulation Surface Flashover in Pressurized SF6

Surface Charge Accumulation and Pre-Flashover Characteristics Induced by Metal Particles on the Insulator Surfaces of 1100 Kv GILs under AC Voltage

Mechanisms of Surface Flashover Along Solid Dielectrics in Compressed Gases: a Review

Influence of Contaminated Location on Streamer Discharge

Surface flashover in 50 years: Theoretical models and competing mechanisms

A computational study of positive streamers interacting with dielectrics

Understanding surface charge accumulation and surface flashover on spacers in compressed gas insulation

A Review on Surface Flashover Phenomena at DC Voltage in Vacuum and Compressed Gas

Charge interaction behaviors at interfacial domains in DC GIL insulators

Characteristics and Mechanisms of Surface Charge Accumulation on A Cone-Type Insulator under Dc Voltage

Analysis on Surface Charging of Insulator Prior to Flashover in Vacuum

Influence of Pollution on Surface Streamer Discharge

Revealing the flashover mechanism of EP/GF composite insulation under DC combined harmonic voltage