Abstract:Charge accumulation usually happens on the surface of spacers under DC operation, which is susceptible to inducing surface flashover. In order to explore the surface charge accumulation mechanisms and the influences of dielectric conductivity, gas ion mobility, and temperature field on the surface charges, a time-varying charge density model at the gas–solid interface of spacers was established. The results of the simulation show that the discontinuity of the current density between the spacer bulk side and the gas ion flow is the fundamental reason for the charge accumulation on the spacer surface. Additionally, the value of current density fluxes at the interface continues to decrease with the change of the electric field, and the progress of charge transfer gradually stabilizes. Moreover, the dielectric conductivity directly affects the charge accumulation process, and there is a critical conductivity in which the effect of charge conduction in dielectrics counteracts that of gas-phase charge deposition, theoretically. When the conductivity is higher than the critical conductivity, the solid-side charge conduction is the main source of the surface charge accumulation, while the gas-phase charge deposition on the gas side plays a dominant role when the conductivity is lower than the critical conductivity. The charge accumulation is not significantly affected by gas ion mobility when the temperature is evenly distributed. However, under the temperature field with gradient distribution, the current density fluxes at the interface change, causing the polarity reverse of the accumulated charge. In the high-temperature region, the volume current density surges simultaneously with the conductivity, leading to a higher density of surface charge accumulation. Lastly, the design of spacers needs to keep the current densities on both sides of the interface as similar as possible in order to avoid excessive charge gathering in localized areas.

Understanding surface charge accumulation and surface flashover on spacers in compressed gas insulation

Review of Charge Accumulation on Spacers of Gas Insulated Equipment at DC Stress

Surface Charging Phenomena on HVDC Spacers for Compressed SF 6 Insulation and Charge Tailoring Strategies

Characteristics of Surface Charge Accumulation on Spacers and Its Influencing Factors

Insight into Charge-Induced Flashover at the Gas–solid Interface in DC Gas-Insulated Systems

Effect of Surface Charge on Flashover Phenomena-A Dynamic Observation Using a 220 Kv Cone Spacer

Mechanisms of Surface Flashover Along Solid Dielectrics in Compressed Gases: a Review

Effects of surface roughness on surface charge accumulation characteristics and surface flashover performance of alumina-filled epoxy resin spacers

A Review on Surface Flashover Phenomena at DC Voltage in Vacuum and Compressed Gas

Charge Cluster Triggers Unpredictable Insulation Surface Flashover in Pressurized SF6

The mechanism of gas pressure and temperature dependent surface flashover in compressed gas involving gas adsorption

Mechanisms of charge-induced surface discharge under positive impulse voltages

Charge Accumulation Patterns on Spacer Surface in HVDC Gas-Insulated System: Dominant Uniform Charging and Random Charge Speckles

Surface flashover in 50 years: II. Material modification, structure optimisation, and characteristics enhancement

Surface flashover in 50 years: Theoretical models and competing mechanisms

Improving Dc Surface Flashover Property In Sf6 By Short Time Fluorination Of Model Spacers

Diverse effects of gases on surface flashover in a wide pressure range from atmospheric to near vacuum pressure

Intrinsic Hetero-Polar Surface Charge Phenomenon in Environmental Friendly C3F7CN/CO2 Gas Mixture

Metal Particle Induced Spacer Surface Charging Phenomena in Direct Current Gas-Insulated Transmission Lines

Luminescence Reveals Micro Discharge As a Potential Triggering Factor for Surface Flashover

Field-dependent Charging Phenomenon of HVDC Spacers Based on Dominant Charge Behaviors